3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT

  Aim: To calculate dead and live load for industrial steel structures and to apply them using TSD.       Calculate dead load in design report based on IS code and apply dead load on the model. Finishes of 50mm Slab as per design Brickwall 150mm thickness Roofing load based on purlin size Ceiling…

  Aim: Is to create the strutural model as per the given attachment.       Create beam properties for First floor and model the beams.   Procedure for thr modelling         Now;       3D view of the model             3d View  …

  Aim:  Is to model the Struture as per the Criteria for the following tasks.         Create column properties for different types of pedestal members and model in the grids created as per the assignment 1     Introdution:Tekla structure is a basic building objects are provided and…

To plan a structural layout and to create grids using TSD   Aim Ans 1. 1. Summarize the user interface in TSD with the for the following items: -  Project Workspace – How to access and usage   Scene Content – Demonstrate the use of scene content  Create two scene views  Loading…

Aim Design & Analysis of a Hostel building at Guwahati, Assam. We have to do the complete design of the struture using SAFE and ETABS software for both Foundation and and super struture design respectively.         Procedure :   Open the Etabs software Click on the new model.    …

Aim 1. Model the isolated footing provided in week 11 challenge on SAFE.       For  Que 1.   Procedure Open the SAFE software Start with the new model. Select the design preferences as metric unit and IS 456.               Select the cover as 50 mm.    …

Aim Design a square footing for a column size of 400 x 400 mm.            Given condition The compression axial load for the load combination of (1.5 DL + 1.5 LL) is 2000 KN. The safe soil bearing capacity is 150 KN/m2 at a depth of 2 metres below E.G.L.  M25 concrete grade.   …

Aim Model the g+ 7 residential building with the given architectural reference drawing typical floor plan is given in the attachment and model as per the IS codes with the reference notes given in the question.         Procedure   Open the e tab software.         The reference…

Aim  Challenge deals specifically with the shear wall of size 300x1500 at grid A-11 in the structural model. And provide the specificied longitudinal reinforcement and Shear reinforcement as per IS 13920.         First we have to analyse the model which is given in the attachment file Before analysis…

Aim Reinforcement detailing of columns in Etabs 2018. The ETABS file for a G+4 building is provided. Run the analysis and design the RCC Moment Resisting Frame         Step 1 Open the the etabs file which is shared previously. Click on the concrete frame Design tool. Select the display option as longitudinal…

Aim Detailed design of Concrete building given In the attachment. Calculate the value of Maximum shear force using manual calculation and compare it with Etabs software. Provide the reason behind the failure of middle span Beam and possible way to solve the issue.         Detail design of beams in Etabs…

Aim  Comparative study of different storey buildings for Seismic forces using Etabs software as per the given attachment.         Effect of stiffness on T Comparing fundamental natural periods of buildings E & F as well as G & H.     For Building E Opening a new model. Setting…

Aim Modelling of 25 storey building with the specified properties mentioned in the assigned task using ETABS Software.       Answer     Start the Etabs software Click on the new model First tab appear is of built in setting, select the units and selecting the indian standard code for steel and…

Aim Conceptual design of a building with columns and shear walls by analyzing the given images.     Ans 1 Restraint of floor shrinkage a).  As shear walls are placed in corners hold the floor from corner so, it restrain from floor shrinkage.   b).  As the shear walls are placed at the floor…

Aim Understanding the concept of placement of the structural members as per the seismic design criteria by aspects of symmetry, redundancy and bi-directional stiffness and ductility.     Ans 1   Symmetry By observing the layout of the given attachment it's showing that it has good Stiffness and mass distribution…

Aim Is to Understanding the concepts on Degrees of Freedom by solving the problem sum given as the challenge. In questoion given values are each storey has mass ‘m’ and the 5 periods of vibration Tn and their corresponding mode shapes, φn.       Ans 1   fundamental…

Aim Is to Calculation of Stiffness in Structural elements shown in figure and the natural time period as per the question.     I have scan the answer and made the pdf so it is uploaded.     Result I have calculated the effective stiffness of the given questions and seen that as single element of structure…

Aim Identification of Cracks by analysing the below images.       Ans 1.   A. This images shown is of Flexure failure and occurs when the imposed loads exceeds the flexural capacity of the structural member. Flexural strength is defined as stress in material just before the yielding starts in flexure…

Aim Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork. Run the Clash Detection Test using Naviswork. Using the Timeliner feature in Navisworks prepare a schedule.       I have recorded the walk through in navisworks but the file generated is not  accessable and showing…

Aim Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo. Create a conceptual mass in Revit and develop a parametric column. Conceptual layout of floor plan in dynamo using the tools available in dynamo.         Ans 1   create a set of sinusoidal…

Aim Preparing Schedule & Cost Estimation for a building using REVIT       Ans 1    a. Using 3D model create a section box  ( BX )        b. To create similar doors and windows in a floor plan layout                c. To reduce…

Aim Structural analysis of a buidling using Robot Structural Analysis       Ans 1    • What are HVAC systems?   The HVAC full form is Heating, Ventilation, and Air Conditioning with respect to building structures. HVAC systems & types are important areas in the field of mechanical…

Aim Creating Architectural and Structural model with 3D rendering using REVIT  Prepare the Architectural and Structural model with the given specification assign in the task in which the archi. model need thr stroge and other details iterm load from the family of revit.           Ans 1 I have…

Aim Using the collaborate tool in revit with some shared parameters options and link with strutral and architectural template project and see whether the level and grid lines when copied moniter to other they changes or not, share parameters are correctly done or not.     Result The result shows that the by sahred…

Ans 1 For our purposes here, when the term 'standards' is used, it refers to the overall system and level of quality the system is attempting to attain. 'Requirement' indicates a topic that is not optional, whereas 'guideline' indicates a recommendation but one that may be optional.   Generally, a BIM manual is not…

Aim 3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT Create a camera-specific view or a 3D view and Create a sheet template from the view tab and adjust the parameters on the sheet to add appropriate views   …

Aim  To create detail layout of the week 2 assignment with appropriate material and floor thickness and by placing tuhe door, window, bathtub in bathroom and dinning table in the side way of the kitchen.     Result Detail layout of the week 2 assignment with appropriate material and floor thickness and by…

Aim Is to create the model and model settings according to the given assignment and with given criteria. Setting up the project with appropriate name and metric unit and save the backup file as 3. Set the levels and the grid lines according to the given distance.     Ans 1 BIM is used for creating and managing…

Aim ; To create the model as per given instruction and given information.     Ans 1 Diffrent template used for creating the project.         Ans 2,3 & 4 Project name with wall 40' x 35' and annotation.         Ans 5 Diffrent wall types       Ans 6 3D…

AIM & INTRODUCTION Creating a 3D rendered model for a Residential Building in AutoCAD Aim is to create the plan in 3d view    The main tool is press pull for creating the 3d model and  in render view     RESULT  The material is provided and after rendering the is shown as the given below…

AIM & INTRODUTION 1. Create a 3D Isometric View of the building with plan and elevation given. 2. Create the 3D View of the Building Façade as given in the plan and elevation. Also, see the detail of the window. 3. Create the ismoteric 3d view of a stair with railing as shown in the plan and elevation. Assume…

AIM & INTRODUCTION 1. Create a 3D Furniture element as shown in the Figure. 2. Create the 3d Model of an Isolated footing as shown in Figure. 3. Create the 3D view of the AASTHO Type Girder. 4. Create a 3d Model of a  drop column with panel as shown in section and isometric view. 5.  Create the 3d model of…

Aim and introduction : Create a layout of the Plan and Section A of the project in Challenges 7 using the template Tutorial-mArch.dwt in a scale as given in the figure. Use the MV command to create the viewport of the size as shown in figure by using ATTEDIT command to edit the information in the title block in A1 size…

Aim and introduction : Create the doors type for warehouse as shown in the figure and create each door type as per standard size or given dimensions and make the blocks of this door type after creating them. Create the door type for residential building as a block. Save the name of the blocks as type by using given dimensions…

 Aim & Introduction To prepare a column and window schedule and the beam details as given in the attachment file. With the given standard text and font size and annotation style.   The column schedule is given with the proper dimensions style and the reinforcement details in the table format and beam details…

Aim & Introduction   For 1 : Draw the elevation and details of a wardrobe as shown in the figure and apply the hatch and with standard dimensions style. For 2 : To draw the floor plan according to the given attachment pdf file and with the proper text style and dimensions. For 3 : Draw the kitchen layout as given…

Aim : Design a plan using AutoCAD with in the plot size given in the question with all the given details as elevation, plan, etc.   Introduction : Start drawing with the given plot size as 60 feet by 20 feet.  Given as below..        

Aim Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan.    • To the pattern with HATCH The hatch command in AutoCAD is used to fill an area or selected objects with a hatch pattern or a fill. Here’s…

Aim: Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles.      • FLOOR PLAN Use dline to create a double line using straight line segments and arcs. Use rectang to create a rectangular polyline.    • Draw external walls…

Aim: Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions as reference to sketch the unit plan. And command use is uploaded as photos          

Aim: Drafting of various geometries using Chamfer, Fillet tool in AutoCad   Fillet and Chamfer show a preview of the results of the operation as soon as you select the objects to modify. If the fillet radius or the chamfer distances don’t look right in the preview, you can change their values before completing…

Aim: Present the floor plan, isometric view and footing plan with the proper discription format.      • FLOOR PLAN Use dline to create a double line using straight line segments and arcs. Use rectang to create a rectangular polyline.    • Draw external walls New drawing. In…

I have done this in AutoCAD and the photos have the discription of the steps in command bar.

Ans 1.   Types of Drawings Used in Building Design Listed below are the majority of the construction drawings. All the types of construction drawings can be segregated into the following sets of drawings:    • Architectural Drawings  • Structural Drawings  • HVAC Drawings…

 Answer   As per Indian Standard Codebook IS10262(2009) – Guidelines for Concrete Mix Proportioning.   A. Grade Designation - M35  B. Type of Cement - OPC 53  C. Type of Admixture - Fly ash  D . Maximum Nominal Size of Aggregate - 20mm  E. Minimum Cement Content 340kg - Table 5-IS456…