The challenge was to find out whether the given fender conforms to the EU standards. If the distance between 5 end points of the reference lines lying on the frame to that of wheel is greater than 10mm the design is satisfactory. In the figure given below it can be observed that the sketch is drawn in the same plane as…

I have approached the design in a serious of steps while considering sound dampening and energy abosrption on impact as the main parameters. STEP1: basic layout with latch and hinge embosses. The blue circles represent the initial assumesd mastic points. This will vary as design matures.   Step2: embosses  the…

https://1drv.ms/f/s!AqwknMJOAGI4g-BZSw9sTs7pIYpUNQ

https://1drv.ms/f/s!AqwknMJOAGI4g-Be-_gNcgtxGemZHw

https://1drv.ms/f/s!AqwknMJOAGI4g-Bz6DT2n5jpqUUhow open above onedrive link for fuel tank and assembly.   below is the link for the entire parts in this project https://1drv.ms/f/s!AqwknMJOAGI4g992SJ6y8Ql5_Sdxqg    

https://1drv.ms/f/s!AqwknMJOAGI4g-BdS97br7xE9vo7Cg

i did spend an enormous time on the project as the whole model was done solely with the help of pdf tutorials and there was a lot of errors both made by me and some in the tutorial file itself.  please have a look into the model and do let me know if there are any errors. NB: the modeling and assembly was done using…

https://1drv.ms/f/s!AqwknMJOAGI4g-Bz6DT2n5jpqUUhow open above onedrive link for fuel tank and assembly.   below is the link for the entire parts in this project https://1drv.ms/f/s!AqwknMJOAGI4g992SJ6y8Ql5_Sdxqg    

https://1drv.ms/f/s!AqwknMJOAGI4g-BfyFFM8VMoycj0Uw

i have changed one of the hinge color so that hinges exhibits the same color. 

pls look onto the assignment.

Vehicle underbody coating is the process of applying a rubberised paint or Teflon (clear coat paint sealant) to the exposed parts under the vehicle body such as door skins, wheel wells, trunks and floor pans. Although these days the entire BIW is met with a five-stage coating process for protection namely Pre-treatment,…

https://drive.google.com/file/d/1ey_A2hd2vTxo6gAKlnvTBqvQb8Z5vGhF/view?usp=sharing

I have already completed this coursework, the resubmission is due to the suggestion provided to me by my support engineer Mr. Bharath.