Aim: Steady-state stimulation of T-joint mixing of hot and cold fluid Objectives: To consider the effects of velocity and length on mixing efficiency To compare k-epsilon and k-omega SST model on mixing problem To perform mesh independent study Formula: Momentum ratio = Cold fluid velocity/Hot fluid velocity Simulation…

https://projects.skill-lync.com/projects/Steady-and-Unsteady-state-simulation-of-the-flow-over-cylinder-59697

Ahmed body: An Ahmed body is a simplified car model. The air flow around the Ahmed body captures the essential flow features around an automobile. It was first defined and characterized in experiment by SR Ahmed. The biggest advantage of this model is its simplicity in shape and construction but it has all silent features…

https://skill-lync.com/projects/ahmed-body-challenge-21

Aim: Conjugate Heat Transfer Analysis of Exhaust Port using Ansys Fluent Objectives: To understand the conjugate heat transfer in exhaust port To simulate flow and heat transfer in exhaust port To carry out Geometry preparation, Mesh formation with good quality and selection of turbulence model by maintaining the Y+ plus…

https://skill-lync.com/projects/conjugate-heat-transfer-analysis-of-exhaust-port-using-ansys-fluent

Aim: Rayleigh-Taylor Instability Simulation using Multiphase VOF method Objectives: To understand the Rayleigh-Taylor instability To carry out the transient simulation mixing of different density fluid using Multiphase VOF method To understand the different CFD models based on RT instability To realize the effects of Mesh…

 https://skill-lync.com/projects/analysis-of-rayleigh-taylor-instability-using-multi-phase-vof-method

Aim: Conjugate Heat Transfer Analysis of Graphic card Objectives: To perform steady state conjugate heat transfer analysis of graphic card To understand the effects of air velocity on heat transfer To compare coarse and refined mesh results  Introduction: In the graphic card problem, there is processor which uses…

https://skill-lync.com/projects/conjugate-heat-transfer-analysis-of-graphic-card

Aim: CFD analysis of Cyclone Separator Objectives: To understand different empirical models and Discretize Phase Modelling role in cyclone separator To understand working of cyclone separator To recognize effects of velocity and particle size on cyclone efficiency and pressure drop   Introduction: Cyclone separators…

https://skill-lync.com/projects/cfd-analysis-of-cyclone-separator-2

Aim: Parametric study of Gate valve  Objectives: To understand parametric study in Ansys Fluent To carry out CFD simulation of Gate valve To obtain the results using parametric study Introduction: A gate valve is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valve requires…

https://skill-lync.com/projects/parametric-study-of-gate-valve-10

Aim: CFD Analysis of Combustion using Ansys Fluent Objectives: To understand the combustor model and species formation in combustion. To observe the different species such as CO2, H2O, CH4, N2, O2, NOx emissions & Soot formation at different location. To recognize the effects of water content on the pollution emissions.…

https://skill-lync.com/projects/challenge-on-combustion-35