Full course · free on YouTube · 2 h 58 min

Multibody dynamics in SOLIDWORKS: free, 3 hours

A single 3-hour video in five chapters. Each chapter models a mechanism in SOLIDWORKS, assembles it with mates, runs a motion analysis and plots results: a Geneva mechanism, a machine vice, a planetary gear train, an IC engine piston and crank, and an IC engine valve train.

20 chapters · published 23 Aug 2024 · 1,18,236 views as of 18 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical engineering students and engineers who know basic SOLIDWORKS sketching and want to learn motion studies and multibody dynamics on real mechanisms.

What will you learn?

  • Sketch and model parts in millimetres, then assemble them with coincident, distance, screw and gear mates
  • Switch a motion study from animation to motion analysis and add a rotary motor at a set RPM
  • Define solid body contacts with a material (steel), gravity and a linear spring with free length and stiffness
  • Plot contact force, linear displacement, angular velocity and trace path, and export plots to a spreadsheet
  • Import spur and internal gears from the Toolbox library and drive a planetary gear train
  • Set output frames per second so the results are resolved at every crank angle

What does each part of the course cover?

6 sections, in watching order. Click a timestamp to jump the player there. Chapter titles are from the video description, lightly edited for spelling.

  1. 0:003 min · 1 chapters

    Introduction

    What the five chapters cover: a Geneva mechanism, a machine vice, a planetary gear train, an IC engine piston and crank assembly, and an IC engine valve train. Each is modelled in SOLIDWORKS and then simulated with a motion study.

    Chapters
    • 0:00Introduction and course overview
  2. 3:1832 min · 3 chapters

    Geneva mechanism: modelling and motion study

    Sketching the driver and driven wheels in millimetres (circles, slots, circular pattern, extruded boss), assembling them with mates, then setting up a motion analysis with a rotary motor at a constant 5 RPM and solid body contact in steel. The contact force magnitude is plotted against time.

    Chapters
    • 3:18Geneva mechanism: modelling the driver wheel (part 1)
    • 15:49Geneva mechanism: modelling the driven wheel and assembling (part 2)
    • 26:58Geneva mechanism: motion analysis and contact force plot (part 3)
  3. 35:1736 min · 6 chapters

    Machine vice: parts, screw mate and displacement plots

    Modelling the fixed jaw with a threaded nut, the movable jaw and slider, the hexagonal-head screw and the handle. The parts are assembled using a screw mate. A 10 RPM rotary motor drives the handle, and the moving jaw's linear displacement and a trace path are plotted.

    Chapters
    • 35:17Machine vice: fixed jaw
    • 47:22Machine vice: movable jaw and slider
    • 53:30Machine vice: screw
    • 56:15Machine vice: handle
    • 59:32Machine vice: assembly with a screw mate
    • 1:06:59Machine vice: motion analysis and displacement plots
  4. 1:11:4417 min · 2 chapters

    Planetary gear train

    Gear terms (module, pitch circle diameter, number of teeth), then ring, sun and planet gears taken from the Toolbox library with 32, 12 and 10 teeth. Pitch circle sketches position them, gear mates link them, and a 10 RPM motor on the sun gear drives the train.

    Chapters
    • 1:11:44Planetary gears: gear terminology and the Toolbox gear library
    • 1:15:58Planetary gears: gear assembly, gear mates and motion analysis
  5. 1:29:0852 min · 6 chapters

    IC engine piston and crank: modelling and motion analysis

    The slider-crank idea, then modelling the piston, connecting rod, end cap, wrist pin and crank. The assembly runs at 1,200 RPM with output at 7,200 frames per second. Piston linear displacement and crank angular velocity are plotted and exported to a spreadsheet.

    Chapters
    • 1:29:08Piston kinematics: introduction to the slider-crank mechanism
    • 1:30:21Piston: modelling
    • 1:41:31Connecting rod: modelling
    • 1:49:03End cap and wrist pin: modelling
    • 1:57:34Crank: modelling
    • 2:06:57IC engine piston assembly: assembly and motion analysis
  6. 2:20:5137 min · 2 chapters

    IC engine valve train: modelling and MBD simulation

    Modelling the cam, push rod, rocker arm, valve and valve stem, then assembling them with mates. The motion study turns the cam at 1,200 RPM with a linear valve spring (free length 45 mm). Stiffness is corrected, and push rod and valve lift are plotted and exported to Excel.

    Chapters
    • 2:20:51IC engine valve train: modelling the cam, push rod, rocker arm, valve and valve stem, and assembling
    • 2:45:37IC engine valve train: MBD simulation, spring and lift plots

Is the Multibody Dynamics using SOLIDWORKS course really free?

Yes. All 2 h 58 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 23 Aug 2024 and had 1,18,236 views as of 18 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Multibody Dynamics using SOLIDWORKS course take to finish?

The video runs 2 h 58 min across 20 chapters. At one hour a day that is about 3 days; plan roughly twice that if you practise each exercise as you go. The longest section is "IC engine piston and crank: modelling and motion analysis" (52 min), so give it its own days.

Does the free SOLIDWORKS Motion course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Multibody Dynamics using SOLIDWORKS (₹40,000), then Post Graduate Program in SOLIDWORKS Design and Analysis (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Do I need SOLIDWORKS Motion installed for this course?

Yes, to follow along. The video shows how to turn on the SOLIDWORKS Motion add-in from the add-ins menu, then change the motion study type from Animation to Motion Analysis. It does not cover licences or installation, so check whether your college or employer provides a SOLIDWORKS licence.

Is this SOLIDWORKS course suitable for beginners?

The title says for beginners, and the first chapter builds parts from scratch: units in millimetres, sketches, extrusions and mates. Every part in the course is modelled on screen before it is simulated, so you do not need ready-made files, but basic familiarity with CAD ideas helps.

Which mechanisms are simulated in the course?

Five: an external Geneva mechanism, a machine vice, a planetary gear train, an IC engine piston and crank assembly, and an IC engine valve train with cam, push rod, rocker arm and valve spring. Each is modelled, assembled, simulated and plotted in the video.

Last updated 18 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 18 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Multibody Dynamics using SOLIDWORKS and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Multibody Dynamics using SOLIDWORKS course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.