Lesson finished
Up next: Radiation Shielding, Dose Units, Limits and Imaging Modalities
Unlock all 15 lessons of Medical Imaging and RadiologyFull course ₹40,000 · paid
Radiation Basics, Atomic Models and Radioactive Decay
A free lesson from Skill-Lync's Medical Imaging and Radiology course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Module 1 Session 1”
What will you learn in this free Medical Imaging and Radiology lesson?
The instructor defines radiation, separates ionizing from non-ionizing types, and walks through Rutherford's gold foil experiment and the nuclear model of the atom. The lesson then covers radioactive decay, the half-life equation, and alpha, beta, gamma and neutron radiation.
- Ionizing versus non-ionizing radiation
- Rutherford's gold foil experiment and nuclear model
- Half-life equation N(t) = N0 (1/2)^(t/T half)
- Alpha, beta, gamma and neutron radiation
What comes after lesson 1?
The next free lesson is lesson 2, “Radiation Shielding, Dose Units, Limits and Imaging Modalities” (29 min). Later in Skill-Lync's Medical Imaging and Radiology course (paid): lesson 4, Module 2 Session 1; lesson 5, Module 2 Session 2; lesson 6, Module 2 Session 3. The full course has 15 lessons (6 h 13 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hello everyone. Welcome to this course on Radiology, which helps you to learn about medical imaging from beginning to the advanced level. And this course is tailor-made especially for biomedical engineering aspirants to learn, improve necessary skills to secure a job in the field of medical imaging domain. So, let's dive into the first lecture on Introduction to Radiology. Today, I'm going to introduce you about this particular subject called Radiology and what makes it so crucial and essential to learn these fascinating topics in medical imaging. In this module, we are going to discuss on radiation basics and its physics behind it, types of radiation, the radioactive decay, and the half-life and its significance, type of ionizing radiation, its use in medical imaging, then source of radiation and radiation exposure and units, application of radiation in the field of medicine and basics of radiation.
In this module, we learn about the basics of radiation and its types, decay and exposure, radiation doses and its limitation, significance of radiation in medical imaging and factors for image acquisition. So, imaging is an essential aspect of medical science for the visualization of anatomical structures. To understand functional or metabolic information of the human body, structural and functional imaging of human body is important for understanding. Human body anatomy, physiological processes, function of organisms, then behavior of whole or part of organ under the influence of abnormal physiological condition or a disease.
Yes, finally, to understand about medical imaging, first we need to learn about radiation. In the upcoming slides, let's discuss in detail about radiation and its key concepts. So, the first question we need to ask ourselves is, what is radiation? So, according to the traditional definition, radiation is the emission or transmission of energy in the form of waves or particles through space or through a material medium. So, radiation is the emission of energy in the form of waves or high-speed particles. All matter is composed of atoms.
So, atoms are made up of various parts. The nucleus contains minute particles called protons and neutrons. And the atom's outer shell contains other atomic particles called electrons. The nucleus carries a positive electric charge, while the electrons carry negative electrical charge. These are schematically shown in this picture. Then, the forces within the atom work towards a strong, stable, by getting rid of excessive atomic energy. Here, it is radioactivity. In that process, unstable nuclei may emit a quantity of energy, and this is spontaneous emission, is what we call as radiation.
Having discussed about what is radiation and how it is produced, let's talk about radiation types. As we know, radiation is energy emitted by source and then travels through a medium such as air until it is absorbed by matter based on energy of radiated particles. They are classified into two categories. The first one is called ionization radiation. The second one is called non-ionizing radiation. So, non-ionizing radiation has lower energy to move atoms in a molecule around or cause them to vibrate but not enough to remove electrons from atoms.
So, they have longer wavelength with a low frequency. Example of this kind of radiation are radio waves, visible light, and microwaves. When it comes to the ionization radiation, it has so much energy that can knock off electrons or atoms. That process is called ionization. So, they have shorter wavelength with a high frequency and a higher energy. Ionization radiation can affect the atoms or tissue in a living being, so it poses a health risk by damaging tissues and DNA in genes. Ionization radiation originates from X-ray machines, cosmic particles, from outer space, and radioactive elements.
And, radioactive elements emit ionization radiation as their atoms undergo radioactive decay. This image shows how atoms have a variety of quantum states or levels and their transitions between those levels that could absorb or release energy. Next, we are going to talk about natural radioactive elements. So, the elements which can undergo disintegration naturally are called natural radioactive elements or radionuclide. These elements origin from nucleosynthesis of stars and supernovae. So, these are long-lived elements and those so-called existed from ages. So, example, cosmic radiation continuously produces carbon-14. And, other examples include thorium and uranium series, each named after the element from which these series start.
So, each series decay through a number of unstable nuclei by means of alpha and beta emission until each series end on a different scope, different stable isotope of lead. So, here in this image, you can see how solar energy particles have been emitted from the sun. And, you can see galactic cosmic rays. And, there are few examples of cosmic radiation such as carbon-14, thorium-232, uranium-238, and 235. So, next, we are going to talk about synthetic radioactive elements. So, what is synthetic radioactive elements? So, these are the type of radionuclides that is not found in nature.
So, no natural process or mechanism exists which produce it. So, these elements decay in a very short time. This method of including a nuclear reaction is harvested from nuclear reactors. So, the examples include technetium-95, prometheum-146 are used for nuclear reactions. Some are manufactured in practical accelerators also. Although, these synthetic radioactive elements cause health hazards, but still they have many medical and industrial uses. So, let's talk about elements in periodic table. So, let's map these elements in our periodic table. So, in this image, you can see the picture of periodic table.
So, this is the list of synthetic elements, rare radioactive natural elements, often produced by artificially uncommon radioactive natural elements, which easily highlighted with the different shades. So, talking about radioactive elements in a periodic table, there are 37 radioactive elements found in the periodic table. They have no stable isotope. These elements are considered as radioactive elements. So, basically isotopes are the elements with different masses whose nuclei are unstable and release excessive energy by emitting radiation. While all elements have some radioactive isotopes to be noted, not all elements in the periodic table occur in nature.
So, this is the list of table of elements that are radioactive. So, keep in mind, all elements can have radioactive isotopes. If enough neutrons are added to an atom, it becomes unstable and decays. So, a good example of this is tritium, a radioactive isotope of hydrogen naturally present at extremely low levels. So, this table also contains the elements that have no stable isotopes. Each element is followed by the most stable isotope. And it's half-life. You have to note that increasing number of atomic number does not necessarily make an atom more unstable.
Next, we are going to talk about nuclear model of an atom. So, many theories proposed on composition of matter in different civilizations such as Greek and Indian. So, the modern theory states that atoms are the units of matter which cannot be split further without energy release. So, experiments by Rutherford showed that the existence of atom with description added on. So, atoms are tiny, dense, positively charged core called nucleus. So, electrons are small, light, and negative units in atom. They circulate at certain distance around the nucleus just like our planets revolving around the sun.
So, here in this GIF, you can see that atomic model. So, electrons are very small, light, and negative units in the atom. So, these electrons revolve around the nucleus similar to our planetary motion. Next, we are going to talk about Rutherford's gold foil experiment. So, based on the Thomson's Plump Pudding model, Rutherford predicted the atom composition by conducting gold foil experiment. In his gold foil experiment, a piece of gold foil was hit with alpha particles which has a positive charge. So, he observed initially, most alpha particles went right through the...
He predicted that alpha particles would shoot through the foil with very easy. Then, some particles had their path bent at larger distance. Then, few even bounced backwards. The only way that would happen in an atom if the atom had a small, heavy region of positive charge inside it. Finally, when gold foil is bombarded with a fast-moving alpha particle, all the alpha particles should have passed through the gold foil with little or no deviation. But, some of them deviated with the larger angles. These observations have been noted.
So, Rutherford has concluded that firstly, the atom is composed of empty space. Next, he concluded that there must be some small, dense, and positive inside the atom that could repel the positively charged alpha particles. Based on the plumb flooding or Thomson model of atom, it will assume that there is nothing dense or heavy enough inside the gold atoms that could deflect the massive alpha particles from their path. So, however, Rutherford actually observed it did not match his prediction, the image on the right. You can see that since most of the alpha particles pass through the gold foil without any deflection, it shows that there is a lot of empty space inside an atom.
Those positively charged alpha particles were deflected by large angles, some even backwards, nearly in the direction from which they had come. So, which shows that there is some positive charge in the center, which is not distributed uniformly inside the atom. This led Rutherford to propose a new nuclear model in which the atom consists of a very small positively charged nucleus, which is surrounded by negatively charged electrons. So, based on the number of alpha particles deflected in this experiment, so Rutherford calculated the nucleus took up tiny fraction of the volume of the atom.
So, the nuclear model explained Rutherford experimental results, but it also raised further questions, for example, what are the electrons doing in the atom? How did the electrons keep up themselves from collapsing into the nucleus, since opposite charge attract, right? So, luckily, science was ready for this challenge. So, physicists such as Niels Bohr continued to design experiments to test the nuclear model, which eventually evolved into modern quantum mechanical model. So, until now, we talked about atom models. So, let's discuss about radiation types. So, in physics, the radiation is the emission or transmission of energy in the form of waves or particles through the space or through the material medium.
So, this includes electromagnetic radiation, such as radio waves, microwaves, infrared, visible light, ultraviolet, x-rays, and gamma radiation. So, the particle radiation such as alpha radiation, beta radiation, proton radiation, and neutron radiation. So, these are the particles of non-zero of rest energy. So, then, we also have acoustic radiation, such as ultrasound signal, sound, seismic waves, depend on the physiological transmission medium. Then, we also have gravitational radiation. So, that takes the form of the gravitational waves or ripples in the curvature of the space-time. So, let's talk about radiation spectra.
So, this image shows the ionizing where ionization radiation is located in the electromagnetic spectrum. If you see, this picture displays the electromagnetic spectrum. The electromagnetic spectrum is a range of all types of EM radiation. So, wavelengths, ranges, frequency ranges, and the energy ranges with various applications are represented. So, for example, in the frequency scale, the buildings with larger scale of 10 power 3 to humans, butterfly, needle points, biological cells in the range of 10 power minus 5, followed by molecules that are smaller to its atoms and nuclei are represented.
In the same way, the electromagnetic energy emitted is also represented with respective frequency. So, from visible light that comes from a lamp in your house to the radio waves that come from a radio station with respect to energy in all ranges have been shown in this picture. Let's discuss on basic terminology used in radiology, so the radioactive decay and half-life period. So, what is radioactivity? By definition, radioactivity is a phenomenon of spontaneous disintegration of unstable atomic nuclei to the form of more energetically stable atomic nuclei.
So, generally, atoms prefer to be in a stable state. Instability can occur if there is an excess of proton or neutron or if atom attempts to reach stability by ejecting the cause of instability in the form of either particles or electromagnetic waves of high energy. So, in these two cases, energy is released and this process is called radioactive decay. At the end, the unstable mass decays or reduces and turns stable. That's why it is called as decay. So, in this table, here you can see different radioactive nucleides and their half-life period.
There is well defined rate of this decay which will be seen in the next slide. As discussed in the last slide, the rate of decay is defined by the term half-life period. At half-life in radioactivity, the interval of time required for one-half of atomic nuclei of radioactive sample to decay or the time interval required for the number of disintegrations per second of a radioactive element. Here, in this equation, you can see n of t equals n of t. Here, in this equation, you can see n of t equals n of t.
N0 of 1 by 2 power T by T half. N of T defines the quantity of the substance remaining. N of 0 is the initial quantity of the substance. T is represented as time elapsed. T half is the half-life of the substrate. So, these spontaneous disintegration of unstable nuclei to atomic nuclei radioactivity can occur naturally and also man-made for different purposes, which we will be discussing in the upcoming slides. As we talked about atomic basic terminologies, let's dive in further into radiology. We will discuss about types of ionizing radiation.
So, generally, radiation are categorized into two types based on the interaction. It is ionization radiation. The second one is non-ionizing radiation. Ionizing radiation is a type of energy released by the atom that travels in the form of electromagnetic waves such as gamma rays or x-rays or particles such as neutrons, beta or alpha. The spontaneous disintegration is called radioactivity. The spontaneous disintegration is called radioactivity and the excess energy is emitted in the form of ionizing radiation. So, the form of radiation which removes electrons from the atoms. So, it is used in the medical imaging because of its penetration capability into tissues and human body.
So, the subatomic particles and photons are having enough particles to produce significant ionization of a substance. So, three types of ionization radiation includes alpha, beta and gamma. So, alpha radiation. So, what is alpha radiation? So, positively charged particles consisting of two protons and two neutrons emitted from the nucleus of some radioactive atoms. So, an alpha particle is a nucleus of helium atom which is shown in the image. An example of decay is symbolized by an arrow of the abundant isotope of uranium-238 to thorium daughter plus an alpha particle.
So, here you can see that PU-239-94 gives uranium-235-92 with an alpha particle. So, the unstable atoms with low neutron to proton ratio may emit alpha particles. So, the original atom with fewer protons and neutrons are different. The alpha particles generally that are present in the periodic table are large and heavy particles. So, radioactive materials in earth are like uranium and thorium emit alpha particles naturally. Next, we will talk about beta radiation. So, beta radiation is classified into two categories, beta minus and beta plus. So, beta minus radiation consists of an energetic electron.
It is more penetrating than alpha radiation but less than gamma. While the beta plus radiation is the emission of positrons which are antimatter form of electrons. where it loses proton and becomes different new atom as shown in the figure. So, in the above reaction for beta decay, mu represents the antineutrino. Here, the number of protons is increased by 1 in reaction but the total charge remains the same because the electron with negative charge is also created. Generally, the atoms which emit beta decay are smaller than alpha particle, beta particles and decay mechanism are used to calculate the age of fossil or an animal or an antique item, which is generally called as carbon dating.
Then, we will talk about gamma radiation. So, gamma rays or gamma radiation consists of photons with a wavelength less than 3 into 10 power minus 11 meters. So, basically it is a speed of light. So, the emission is a nuclear process that occurs to rid an unstable nucleus of excess energy after most nuclear reactions. So, the high energy waves which travels in the speed of light has a potential to penetrate deeply into the matter. For example, X-rays are stopped by dense materials like bones, tumors or lead is used for medical diagnostics.
Gamma rays penetrate through lighter energy used to target and eliminate tumor and also used in different industries and agriculture purposes. Let's talk about neutron radiation. So, neutron radiation is a form of ionization radiation that presents as free neutrons. Typical phenomena include nuclear fusion or nuclear fusion causing the release of 3 neutrons which then react with nuclei of other atoms to form new isotopes which in turn may trigger further neutron radiation. So, it is basically the result of nuclear fusion reaction in nuclear reactors. Water and concrete are the few eclimperine materials which are used to stop this radiation.
So, generally these kind of behavior are used to create isotopes which are dedicatedly used for medical purposes. So, we are asked by the different shots that are used to drop this radiation, the outside source for molecular action. We are used to be limited to this radiation and the outside source of a flying force. So, you know, we are used to take the radiation, the inside source of a flying force. So, the other side of the telescope does not need to attach a range. You