Lesson finished
Unlock all 35 lessons of BiomaterialsFull course ₹40,000 · paid
Composite Biomaterial Factors, Market Applications and Module Summary
A free lesson from Skill-Lync's Biomaterials course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Module 1 Session 3”
What will you learn in this free Biomaterials lesson?
The lesson covers the five factors in manufacturing composite biomaterials: concentration, orientation, distribution, size and shape of the reinforcement. It then surveys market applications such as wound care and neural repair, and summarizes the module.
- Effect of reinforcement concentration on strength and cost
- Orientation and distribution of dispersed particles
- Biomaterial uses in wound care and neurology
- Module summary and career pointers
What comes after lesson 3?
Later in Skill-Lync's Biomaterials course (paid): lesson 4, Module 2 Session 1; lesson 5, Module 2 Session 2; lesson 6, Module 2 Session 3. The full course has 35 lessons (13 h 22 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Next, we will going over the factors involved in manufacturing of composite biomaterials. There are five main factors as you can see here. They are concentration, orientation, distribution, size, and shape of the reinforced material. First, let's look at the concentration of the reinforced material in the matrix phase. As you can see here, on the left, there are a few dispersed molecules present in the matrix phase, meaning a lower concentration. But on the right, you can see there are more dispersed molecules, meaning high concentration. The concentration of these dispersed molecules varies according to their application in the composite.
If a higher concentration of dispersed molecules is needed to achieve a desired property, it should be targeted in the manufacturing process. Beside this, there are no main reasons to increase the concentration of the dispersed molecules, because increasing the concentration will also increase the cost of the material. There are multiple factors considered while identifying an optimal concentration, such as cost, application, and stability of the material. The next factor is the orientation of the reinforced phase in the matrix phase. From the second diagram, you can see that there is a horizontal and vertical arrangement of dispersed molecule.
The arrangement of dispersed molecule can impact the properties and stability of the material. You can decide the arrangement of dispersed molecule based on the desired property and application of the material. Say, let me give an example in the orientation figure. As you can see, the dispersed particle one is in horizontal and another one is the vertical direction. So, accordingly, the property will vary like it will have more strength in the horizontal direction or in the vertical direction and accordingly the properties of the composite will change.
Similarly, if I will be talking about the concentration. So, if suppose the reinforced particle have higher strength. So, in order to increase the strength of the composite, we need to increase the concentration of the reinforced particle. And accordingly, the resulting composite will have higher strength. And then there is distribution or the distribution pattern. As you can see, the two diagrams are quite similar. The diagram on the left shows the distribution in just first row. The diagram on the right shows distribution with gaps between the placement.
This shows a variation in distribution pattern. The distribution pattern play a major role in the internal stability of the structure and property of the exhibition. So, for example, if there is a uniform distribution. So, accordingly, the property will be uniformly distributed by the reinforced particle. And if it is like randomly distributed. So, accordingly, the properties will vary within the entire composite. So, based on the application, the distribution of the reinforced particle varies. The next one is the size of the dispersion molecule. It is also an essential factor in the manufacturing of composite biomaterial.
Dispersion molecule may be large or small. So, basically, it depends the factors that are involved while deciding if the reinforced particle will be large or small. So, it will depend like what is available in the market. The first thing. The second thing is, say, if we will focus at the small area of interest within the composite. So, in that area, what properties we require. So, accordingly, the composite will vary whether it will be large or small. So, if we want more properties of the reinforced material at that area of interest. So, the large reinforced particle will be used. Otherwise, the small will also survive.
The next one is the shape that also plays a major factor while developing the composite biomaterial. Sometime, the dispersion phase may be circular as you can see here or it may be a triangular or it can be of other shapes as well. The shape of the dispersion particle will impact the arrangement of the biomaterial. This will have significant effect on the stability and performance of the composite biomaterial for a specific application. So, to better understand this, suppose, if you will take a circular shaped reinforced particle. So, in that case, what will happen? The stress distribution at the surface will be uniform in all direction.
However, if you will be taking a triangular reinforced particle. So, the stress concentration will be observed at the edges. So, accordingly, what all desired properties you require in the composite material, the reinforced particle shape will change. When you optimize a factor in a composite biomaterial during a manufacturing process, you should vary one factor and keep the other constant. So, it is basically a standard protocol. Say, if you design a particular component. So, for designing, you need to optimize certain parameters. So, it is not always possible that all the parameters can be optimized at a time. So, what actually designer used to do?
They optimize one particular function and once that is achieved, the designer works to achieve the optimization of other parameters. So, for example, if you want to optimize the concentration parameter, you should vary only that and keep others constant. This will make it easier to optimize for that factor. Optimization will be difficult if, for instance, you optimize concentration shape and orientation all at the same time. Therefore, factors are to be optimized one at a time. This means that after determining, for example, the optimal concentration, you can move on to find the optimal orientation. After this is done, you can move on to the optimal distribution. While each factor is being optimized, the other should be held as constant.
A composite biomaterial can be classified based on the type of dispersed phase that is particle reinforced, fiber reinforced or structural reinforced. So, we will talk about large particle reinforced composite. So, particle reinforced composite are further divided as large particle or small particle reinforced composite. So, now we will be talking about large particle reinforced composite. So, as it is a large particle reinforced composite, it has a filler size that ranges from 1 to 50 micrometers. Dispersed particles. Dispersed particles are harder and stiffer than the matrix phase. These reduce or close the internal void space inside the matrix. For example, SS stainless steel implant. It can be developed by mixing in matrix phase and initially available in the fluid form that later solidifies and form a composite or it can be mixed with the matrix phase initially available in powder form and then processed to become a hard solid solid solid solid using powder metallurgy technique. So, what actually happens. So, while mixing the rain force with the matrix. So, it is not possible to mix two solids together. So, in that case, what actually happens, we used to like convert the matrix phase in a liquid phase and then we mix the particles. Particles are mixed like it can be stirred or accordingly, there might be many techniques. So, they are mixed within the matrix phase.
And then the matrix phase is allowed to solidify. So, finally, we will get the composite biomateria. The second one is powder metallurgy technique. In this, what happens is the matrix phase is in powder form. So, in powder form, you can mix the reinforced particles. And then we can like once they are mixed together by stirring and other technique and then compaction technique is applied such that once all the powder get compact by using some adhesive and all. So, they form a composite biomaterial using this technique. So, there are two techniques. First one is using liquid or the other one is by using powder of the matrix phase.
This type of composites. This type of composites also provides higher internal strength and prevent matrix movement. Dispersion strengthened composites are also particle reinforced composites. However, the particle size is small, say up to 1 micrometer. In these, the matrix carries the external load unlike large particle reinforced composites. So, now let's talk about continuous fiber reinforced composites. In this case, what actually happens. So, instead of using particles, the fibers are used. So, these fibers can be continuous or it can be discontinuous. So, in case of continuous, as you can see at the slide. So, it is like something when there is a building that is like in the developing phase. So, there are steel rods. With those steel rods, they prepare a structure.
And within that structure, they put cement to solidify. So, what actually happening is, it is basically a kind of continuous fiber reinforced composite. So, the steel rods are acting as a reinforced composite and the cement is the matrix phase. So, likewise, the continuous fiber reinforced composites are developed. So, this is one of the best examples that I can give at this point of time. So, fibers are distributed in an aligned way continuously in a matrix. Fibers are generally longer, 15 times larger than the critical length. So, critical length basically means fibers are generally longer, that is, are longer than the other type, that is, this continuous type of fibers. Due to longer length, most of the load of the material is transmitted from the matrix to the composite.
So, for example, let me give the same example. So, when like the structure, the structure of the building. So, in that, what actually happens is, the loading will be basically carried out, not by the cement, it will be carried out by the steel rods. The second type is discontinuous fiber reinforced composite. So, unlike continuous reinforced composites, the fibers are discontinuous in nature. So, the other type of fiber reinforced composite is discontinuous fiber reinforced composite. In these, the fibers are discontinuous in nature. They are not continuous. They are discontinuous.
in the next video. And they are smaller in length as they are distributed throughout the body of the matrix and they can be aligned or they can be random. So fibers are distributed in an aligned as well as in random way discontinuity in the matrix. Fibers are generally shorter than the critical length. Due to its short length, very less load of the material is transmitted to the matrix to the composite. It is inexpensive, it is less time consuming fabrication and easy to transform into a critical shape. So yeah, this is a point because in case of continuous fiber reinforced composite, the structure to develop the reinforcement, it is difficult compared to that, it will be in random nature. So it will be directly like say mixing the fiber particles and accordingly like they are allowing the matrix to solify and preparing the composite structure. The another one is structural composite, which is laminar. In this case, what actually happens? So let me first give an example of a bone.
that is in particular trabecular bone. So if you will look at the stress strain diagram of the trabecular bone, what you will see? What actually happens? It is a type of form basically. So when you will compress it, what it will happen? It will try to like get shortened in length. So first what happens? It will get short in such a way that the empty space between the form. First it will like be reduced. So once all the fibers of the form, adjacent fibers will get in contact with each other, then for further the plastic deformation will start. So accordingly it will absorb more energy because it takes longer time to deform. Therefore it has more energy consuming capacity. Similar is the case with the structural composite. In this what actually happens is there is a form like structure, which is basically called as reinforcement. In this above and below the top layer and the bottom layer, there is matrix. It is basically a form of sheet.
So the sheet is attached or it is like attached with a glue or something like that. So they are attached to at the top and the bottom. And then when the load is applied, it has the more ability to absorb energy compared to that if the form is not used. So two or more sheet or layer are bonded and combined in a specific direction within an integral space matrix. Strength of the material depends on the direction of sheets and the layers. The layers are generally 2D. Layers basically the matrix part that I was talking about.
So the next type of structural composite is the laminar structure composite. So starting with the laminar type of structural composite. So take example of the cortical bone, the structure of the cortical bone. So most of you might not be knowing what is the structure of composite bone. So let me explain to you. So let's take an example, say a mat. So go to the market and purchase different types of mats. So in those mats, what actually happens, there is a like embryo of the fibers are there in different direction. So one might be in at a 90 degree at a 30 degree or at a 45 degree. So suppose you take all those mats and glue them together, bond them together, one above the other.
And then you like bend them in a shape of a slender. So now if you will try to stretch them, to pull them, what will happen, you will find it difficult compared to that if you will be like stretching one mat. So similar is the structure of the cortical bone and similar is what the laminar structure composites are. So happening is there are 2D layers of different biomaterial phases. They are bond together in such a way that the orientation of each of the fibers in each layer are different. So they are bond together in such a way that the enhanced material properties that we can get from that composite material.
So looking at the slide, there are 2 or more sheets or layers bonded together and combined in a specific direction with an integral space matrix. So it is clear I believe strength of the material depend on the direction of sheets or layers definitely see as I have said that the orientation of fibers are in different direction. So accordingly the properties will depend. The third one is the layers are generally in 2D. So basically they are nothing like 2D in the nature. So you can say that thickness is comparatively lower than the length and the width. So the another type of structural composite is sandwich panel type of composite material.
So the another example that I believe I should give is of the example of trabecular bone. So in trabecular bone it is basically a spongy bone. It is basically in the form of a foam. So when you compress a foam what happens? First the vertical part of the foam will get compressed. Will get compressed in such a way till adjacent the neighboring layers will get in contact with the base one. So as a result of which it will absorb more energy. So when more energy will be consumed that means it is beneficial since we can give more energy more load to the component.
In this case it is sandwich panel structural composite. So it will absorb high energy and the best example is the trabecular bone. So we have the face adhesive material, a honeycomb structure and an adhesive material and a face again. As you can see at the slide there are two faces the above and the below as shown as by the red color. So these are made up of steels and in between there is a honeycomb structure which is basically a type of foam. So these plates and the foam are bonded together by adhesive material. So when the load will be applied at one end so it will has the ability to absorb more energy.
So looking at the slide a layered composite with two parts. The first one is face and another one is core. Idea sandwich structure hexagonal honeycomb structure is used. So hexagonal shaped honeycomb structure what does it mean by? So see as I said it is a type of foam. So foam is composed of one type of structure repeatedly like one structure is repeated again and again. So there are different types of structure will be there. They say hexagonal shape, cubical shape and other type of shape. So hexagonal type of shape is among the best one compared to other shapes.
So stiffness of the material increases with thickness of the core. Definitely if the thickness will be more it will take more energy to deform. Because the vertical part of the honeycomb structure is more and will take more load to get reduce and to touch the base layer of the honeycomb. So coming on to application of composite biomaterial. The first one is orthopedic application. The first one is in bone grafting. So as I have said earlier though it is of basic of different types. So let me give a summarized view.
In bone grafting the bone is extracted from a human or an animal from different bones. Say suppose for revision hip arthroplasty. When the revision hip arthroplasty takes place the bone is extracted from the femoral head of the patient or from a different patient. So with bone grafting what we use is polyhydroxyapatite. Polyhydroxyapatite is basically a combination of calcium phosphate and then we also use polyurethane composite. So polyurethane composite is basically used to like as I said it is also a form like structure. It gives support to the bone grafting.
The another one is hydroxyapatite particles and then there are collagen fibers. So collagen fiber gives strength to the defect like which has been filled. Another one is bone cement. So bone cement basically act as a glue between the implant and the body. So bone cement is composed of polymethyl meth acrylate plus stainless steel, titanium and glass fibers. The third one is artificial tendons and cartilages. So it is basically made from two hydroxy methyl meth acrylate and PET fibers. The last one is joint prosthesis which is for hip and knee replacement.
It is made from UHMWPE metal and ceramic combination. The another application to composite biomaterial is in cardiovascular application. So it is basically used in vascular grafts. So it is basically made from collagen, gallatin plus PET, PU and PTFE. Another application is in cardiac stent. It is made from stainless steel, cobalt chromium plus PD-LA-PLGA. Then it comes to dental implants. So dental implants basically it can be used to replace the outer part of the teeth by the crown or the entire teeth can be replaced by a dental implant.
So dental implant is basically made from titanium metal, PEGT, PBT copolymer and hydroxyapatite particles. So dental restorative materials means the replacement of the tooth by a crown. So basically what happens is the doctor used to process the damaged teeth. In particular they used to machine the outer surface of the teeth so that the space can be developed for insertion of crowns. So crowns are basically made from ceramic particles. The last one is dental prosthesis. Dental prosthesis is basically what happens is the doctor take out the entire teeth.
So after that they fill the cavity that is formed by removing the teeth by like allografts or by cement. So from there they used to like add the implant. They used to insert the implant in the space. So it has been filled by the cement. After that what happens is cement gets solidified and it will allow to get adjusted. Show biocompatibility with the teeth part. So dental prosthesis is made from carbon, Kevlar, UHM, WPE plus PMMA that is polymethyl meth acrylate. Now coming on to innovation trends in biomaterials and market research.
The first one is tissue engineering. Reinforcement of living human cells into a biodegradable biomaterial based scaffold to construct. Bioactive tissues. So basically in this field what happens is first they prepare a scaffold. Scaffold is basically acting as a structure where cell growth will take place once it will be implanted in the human. So what happens is in the scaffold they put cells, growth factors and other things and then it gets implanted in the human body and once it will be implanted the cells will interact with the human body and accordingly the biocompatibility will start and the biomaterial gets adopted to the human tissue. So in this case so one of the application of tissue engineering is the replacement of the human skin. The next one is electrochemical biosensor development. In this reinforcement of conductive particles like graphene into a semi-conductive polymeric matrix like polypyrrole or polyaniline to create a non-composite base for sensors electrodes.
So basically in this case the major application is in the development of hearing aids. The third one is novel drug delivery. Microbe bubbles, micro needles and other nanoparticles or microparticles based polymeric biomaterial based vesicles for sustained and controlled drug delivery. Let me give an example for this. So suppose if in case the drug delivery is not possible by directly inhaling In that case micro bubbles or micro needles are used for suppose during hair transplant. So during hair transplant what actually is done is the doctor used to insert the needle again and again so that the pain should be less during the grafting process.
So in that case micro needles are used. The fourth one is wearable devices. The development of implants is not like it is for implanting purpose and such that it can also be used for other purposes. Suppose we take an example of smart watches. Smart watches are used to monitor healthy lifestyle input such as blood pressure, heart rate, sugar level and lung condition. So see about the modern market how they are evolving. So they are giving gadgets such that they are also useful for a healthy life as well as they look good and they can be like removed from the body whenever it is required.
The next one is the next one is the next one is the next one. The next one is wound care and haemostats. So in this case new biomaterial composite dressing such as nanofibers development for the acceleration of wound healing process and quick haemostasis. Haemostasis means haemostasis basically means the stability. Stability means how the biomaterials get adopted to the human body and accordingly it will like act as one part of the body. The last one is artificial body organ development. It is basically the 3D printing, essentially body organ development based on biocompatible biomaterial for longer sustainability and effective performance.
So let me discuss more about the 3D bioprinting. So as you might be knowing, some of your friend might be a mechanical engineer or something like that. So there are different manufacturing processes. One advanced manufacturing processes, additive manufacturing. In this, what actually happens is, they use some material. In this case, they are using a biomaterial. And using this biomaterial, they use different techniques such as 3D printing or laser sintering or SLS printing. And there are so many types of 3D printing, additive manufacturing technologies are there.
One of them is 3D printing. In this, what actually happens is, first a CAD model, a drawing of the organ is developed by the designer and then it is fed as input to the machine. And once it is fed as input to the machine, it is sensed by the machine. And accordingly, a layer by layer deposition of ink, the biomaterial part in the liquid form, it is like projected at a base in such a way that it will progress. As it will solidify by at each layer and once it will progress, it will form a complete organ.
And you will see the finishing of the product, the organ, the artificial organ is much higher than it can be developed by conventional manufacturing processes such as lathe, CNC machining and other manufacturing processes. Last but not the least, other innovation trends are infection prevention devices, nanorobotic devices for surgical tools and patient monitoring, rapid diagnostic kit test that is used for COVID detection as well, microfluidic devices, drug device combination, drug lucting, cardiac stands, magnetic hyperthermia, piezoelectric material and LDS material for bone defect and repairment. So now let's talk about microfluidic device.
Microfluidic device has four micro channels with antibodies. Put blood in the channels, blood has antigens, antigen react with antibodies and change the color of the blood. Therefore, four tests can be performed at a time. Now let's talk about magnetic hyperthermia. It is another method that cures cancer. In this method, the temperature increases only in cancer cells. This is achieved by electromagnetic nanoparticles. The third one is piezoelectric materials. They are prominent in the field of biomedical research. Piezo means pressure and electric means electrical impulse. When pressure is applied to biomaterials like quartz crystal, they generate an electrical pulse that is essential for osteoconductive properties in orthopedic application.
Piezoelectric biomaterials are used for bone generation and bone repair. LDH or layered double hydroxyl oxide are also useful in the repair of bone defects. These has three layers. One is metallic cationic layer. The other one is anionic oxide layer and a neutral layer in between. So what we have covered till now encompasses current innovation trends ongoing in the biomedical research field. Now we will look at the current market scenario for the biomaterials. The type of biomaterials, composites, applications and innovation trends are related to the biomedical market.
In 2020, the global biomaterial market estimated to value around 35.5 billion USD. According to research and analysis, it is predicted that the biomaterial market will value around 47.5 billion USD in 2025 with a 6% compound annual growth rate. The rate of growth suggests a bright future for the biomaterial domain. Let's look at some common drivers of the biomaterial market. The first one is the industry and academic project collaborations. Many industries are taking part in academic research projects. As industry professionals have a practical understanding of the application of biomaterials and how to market products, they bring a lot of industry relevant value to academic projects.
This can give rise to new ideas and improve innovation in the biomaterial domain. Next is the provision of research grants for novel biomaterial development from government bodies like the Department of Biotechnology, the Department of Science and Technology. Grants can also be given by bioincubators. These research grants help continue and further research that can propel the biomaterial market forward. As some biomaterial are expensive, funds will aid with cost associated with the process of testing and analysis. Another market driver is the increase in the rate of startup company's establishments.
Over the last 5-10 years, many startups have been established in the biomaterial field. These startups develop good innovation devices, kits, surgical materials or drug delivery systems. Around 70-80% of the startups are related to the healthcare industry. These startups companies have the potential to exponentially advance in the biomaterial field. Now that we have seen aspects that can drive the biomaterial market forward, let's look at the market restraint factors. These market restraint factors have slowed the biomaterial field down. A major market restraint factor is the COVID-19 pandemic.
This pandemic put a way of project and work in this field on hold. Researchers were not able to physically work together on the projects and manufacturers are not able to produce their products smoothly. All of this combined stun the growth of the biomaterial field, which is still reeling from the effects of pandemic. The next restraint in the biomaterial field is the requirement for mandatory clinical trials for higher risk based devices. Clinical trials have to be conducted on devices and implants that come in contact with the human body.
Before the clinical trials, you have to first get approval for pre-clinical studies done on animals such as in vivo, in vitro, ex vivo and others. In addition to this, biocompatibility tests are also have to be performed on animals and cells. This entire process is expensive, sometimes unethical and requires a lot of funding and experience. As a result of this, you cannot commercialize a product unless you have funding for it. Another restraint is the complex pathway for regulatory approval especially for new biomaterial based devices. Each country has separate guidelines.
If you develop a device in India and want to market in USA, you should get the product clear according to the USA standards that is US FDA standards. If you want to market it in Europe, you need approval from CE mark. Similarly, if you want to market in Australia, you need approval from TGA. You need approval from the country, the product will be marketed or sold in. Permission and grant for approval to market the device in the specific region will be given if the device clear all the tests and it is safe and it is performed.
Well, moving on to the key biomaterials in the market. As we have covered earlier, there are metals, polymers, ceramic, and natural biomaterials. Starting with metals, stainless steel happens to be the major biometal. In addition to this, cobalt chromium, silver, aluminium, and gold. Second is the class of polymers, which also have a wide array of applications. Polymers such as PMMA, polymethyl methacrylate, polyurethane, polyethylene, polyester, and silicon rubber are common in biomaterial market. Other polymers in the market include PLGA or polylactic glycolic acid, polypyrene, polyaniline, polylactic acid, and polyglycolic acid.
Next is the class of ceramics. In this, there is calcium phosphate, carbon glass, calcium sulfate, aluminum oxide, and zirconia. Natural biomaterials in the market include hyaluronic acid, cytosine, collagen, silk, cellulose, gelatin, alginates, and fibrin. These are the biomaterials used in tissue engineering, hemostate development, drug delivery, and gene delivery. We will now look at the key areas of biomaterial application in the market. First, we have the orthopedic application of biomaterials. This includes hip, knee, and shoulder replacements, spine repair, and synovial fluid supplements. Bone grafts and fracture fixation devices like bone plates, screws, wires, rods, and pins are also orthopedic application devices of biomaterials in the market.
Coming to the cardiovascular application of biomaterials, this includes cardiac stents, pacemakers, cardiac D-HUDWALS, vascular grunts, biosensors, catheters, and guide wires. In the field of ophthalmology, 15% of the biomaterials market is accounted by contact lenses. There are also intraocular lenses, ocular tissue replacement, and artificial cornea. Dental applications of biomaterials in the market include dental implants, screws, and dental membranes. When it comes to tissue engineering, biomaterials are found in the development of scaffolds and nanocomposites for biosensors. In terms of wound care, sutures, staples, skin substitutes, surgical hemostates, and sealants are common biomaterial applications in the market.
Biomaterials also find their application in neurological field. It involves neural prosthesis, neural stem cells, and CNS repair scaffolds. Other applications of biomaterials in the market are drug delivery and plastic surgery. So friends, this brings us to the end of the week one content. Let's briefly go over what we have covered today. We learned that biomaterials should interact with the biological systems. They should be biocompatible for safe use in the human body. Biomaterials are also not drugs, and all biomaterials are not biological materials. Biomaterials can be classified according to factors such as source, biodegradability, fabrication process, and application.
Composite biomaterials are composed of matrix and dispersion phases, and are used in the industry due to unique properties they offer compared to individual component properties. The classification of composite biomaterials depends on the characteristics and arrangement of the matrix and dispersion phase. There are many factors involved. When developing a composite biomaterials, concentration, arrangement, size, and structure variation are considered, the biomaterials market shows satisfactory growth expected for next five years. There are many biomaterials innovation trends and research ongoing currently. When choosing a carrier, you should study the market in the field and identify the opportunities in it.
This will help you to build your carrier in the field of biomaterials. So friends, these are the image credits. So I thank you all. So here we are ending the module 1, and I will love to see you in the next module in the upcoming week. Thank you very much. Take care.