Unlock all 9 lessons of 5G TestingFull course ₹40,000 · paid
5G Core Architecture, Deployment Scenarios and the AMF
A free lesson from Skill-Lync's 5G Testing course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1”
What will you learn in this free 5G Testing lesson?
This lesson introduces the 5G testing course and the role of 3GPP, then covers deployment scenarios and SSC modes. It compares service-based and point-to-point architectures with interfaces such as N11 and N14, and details the AMF functions of registration, security and mobility.
- Role of 3GPP and 5G deployment scenarios
- SSC modes and standalone versus non-standalone options
- Service-based versus point-to-point architecture and N interfaces
- AMF functions: registration, security and mobility management
What comes after lesson 1?
The next free lesson is lesson 2, “SMF, UDM, UPF and HTTP/2 in the 5G Core” (30 min). Later in Skill-Lync's 5G Testing course (paid): lesson 4, Week 2 Session 1; lesson 5, Week 2 Session 2; lesson 6, Week 2 Session 3. The full course has 9 lessons (4 h 10 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hello everybody, welcome to this course in 5G testing, week 1, Introduction to 5G Core. So, as a part of this first week, what we should be talking about is a short overview on the 5G architecture, different deployment scenarios, both in session and service continuity modes. Then we will be talking about different 5G Core components like Policy Control Function, shortly known as the PCF, then the Charging Function or CHF, Session Management Function or commonly known as the SMF, Access and Mobility Management Function or AMF. Then we will be talking about User Plane Function, which is UPF, then Unified Data Management, QDM, then we will talk about different protocols in 5G like PFCP or known as the Packet Forward and Control Protocol.
Then we have HTTP 2 or Hypertext Transfer Protocol version 2, then we will talk about the NG Application Protocol or commonly known as the NGAP, then finally the updated version of the existing NAS with respect to 5G that is known as the 5G Non-Access Tratum. So, overall this week we will be talking about different deployment of scenarios in 5G, then we will talk about different 5G Core Components and commonly used 5G protocols. So, before we continue with this course, it is assumed that there is a considerable understanding of existing 4G network and the architecture.
So, now we will have a dive in the 5G architecture. So, before we begin, let's have a quick understanding on the 3GPP. So, 3GPP is an organization that is responsible for developing and maintaining the standards for mobile communications, including the development of the 5G network architecture. The main focus of 3GPP is to define a combination of LTE and new radio or NR and their access for the 5G networks. The goal of this organization is to provide seamless and efficient mobile communication experience with high data rates, low latency and improved reliability for the users.
In order to achieve this, the 5G architecture is being proposed by 3GPP is based on an evolved version of the evolved packet core, that is EPC. Well, EPC is a key component as we know about on the 4G LTE network and has been further developed to support 5G. The evolved DPC architecture provides a strong foundation for the 5G network to support a wide range of services and applications, including those that require ultra low latency, such as remote surgeries and autonomous vehicles, which is commonly we see in day-to-day life.
With respect to, we see we have Tesla here, we have other companies coming up in Europe, European Union, that is focusing on more and more support for the autonomous vehicles. One of the most significant features of this 5G architecture that is proposed by 3GPP is its ability to support variety of devices and different use cases. This 5G network will be able to accommodate, well, will be able is a past term now, the 5G network is able to accommodate an unprecedented number of connected devices and provide them with a high speed, low latency connection.
This is made possible by the introduction of new radio technologies, such as millimeter wave, which can transmit data at a much higher frequencies than those used in current 4G networks. Well, in summary, the objective of 3GPP in creating 5G architecture is to support long-term evolution and define a combination of LTE and new radio access. The 5G architecture, the 5G architecture being the foundation for the network to support a wide range of services and applications, it is able to support a variety of devices and use cases.
And with the ability to support a variety of devices and use cases, the 5G network will provide seamless and efficient mobile communication experience with high data rates, low latency, and improved reliability for the users. Next up, we have the service-based architecture. But before we dive into the service-based architecture, there are two perspectives of 5G core. One is the service-based architecture. One is the interface-based architecture. Well, the 5G service-based architecture is a new and innovative approach to designing and building the mobile networks. It is based on a service-based architecture, known as the SOA, that provides a flexible and modular framework for deploying new services and applications on the network.
The key components of this service-based architecture are as follows. The first up is the service-based interfaces or commonly known as the SBI. These are the interfaces that enable communication between the network functions in the 5G architecture. The SBI allows different network functions to communicate with each other in a standard way, making it easier to develop and deploy new services and applications on the network. Then we have the network functions, which are essentially our components that is present in the network. These network functions are software components that provide different functions of the 5G network.
The network functions include functions such as radio access that is done by our 5G NR, new radio, or the GnodeB. Then we have the core network. There are so many components of the core network because of network slicing and so and so. So we have there are transport network functions also and there are administrative functions also that that is solely responsible for maintaining the security and administration aspects of the 5G core. And also there are analytics aspects as well, which definitely with the advent of machine learning and AI, we definitely need a lot of analytics on our 5G core so that we collect sufficient amount of data that can be used to predict or to provide better services to the end users.
Then we have the service instances, well, these are the instances of the services that are provided to the end users of the 5G network. The service instances includes functions such as voice over internet, that is the web protocol, video streaming, and IoT services or the internet of things services. Well, IoT services is a very widely used and commonly used term. That means a lot of devices are there in the network we see, right? We have a lot of Bluetooth devices. We have refrigerators. We have washing machines.
We have connected cars. We have Bluetooth speakers. We have n number of items that we just need to insert a GPS. We just need to insert a SIM and then it gets connected to the network to maintain all the services. We need this kind of slicing that is provided by the 5G core. And obviously, when you talk about slicing, we have the network slices, the next component of our 5G service based architecture. These network slices are virtual networks, right? That are created to provide specific set of services to a group of users.
The network slice provides a dedicated network environment that is optimized for specific requirement of the services and applications being used. The service management and orchestration, that is SMO, I already spoke about it, that we need administrative and orchestrative and security. All those, there are aspects of 5G core that needs to be handled by a specific set of network elements, right? So, this is another key component of the service based architecture. We have SMOs. It is the component that manages different services and applications within the network.
The SMO has an ability to provide for monitor and control of the network resources to ensure that the services and the applications are running smoothly. Then, we have service exposure. This is a very important aspect of this 5G core that these network elements can expose APIs to the outside world, which the network operators can leverage to develop different services. So, this is the component that enables third-party developers to create and deploy new services and applications on the 5G network. The service exposure provides a standardized interface that allows developers to access the network functions and create new services and applications.
Well, to cut short, the 5G service based architecture is a flexible and modular framework that is deploying for new services and applications on the mobile network. The key component are essentially the service based interfaces or the SBIs that exposes different APIs. Mostly, they will be having HIT. VP2. And then we will be having network functions, service instances, then network slices, then we have service management and orchestration, the SMOs, and service exposure. Understanding these components is critical because we need to develop and deploy new services and applications on the 5G network.
Well, as we can see on the screen now that there are different instances that is there on the 5G network that we have here the GMLC, we have UDM, right, then we have AUSF, all these things are here. Then we have the UDR, then or the UDM, then we have the PCF, UPF, all these things are there. So just to have a brief overview like what all these functions will be doing, right. So for example, we have AMF, that stands for Access and Mobility Management, PCF is for Policy Control, then we have SMF, that is for Session Management, then we have one function for User Plane Management, that is the UPF, some function for Charging, that is the CHF, right.
Some function for Authentication, that for that we have the AUSF, right, then we have the UDR, that is sort of a data repository, then we have the NSSF, that is the slice selection, so to select different slices that is currently or that will be applicable for different scenarios of 5G deployments. Then we have the security edge protection, then we have the security edge protection proxy, sort of a security proxy or VPN proxy that is provided. Then we have the service capability exposure function, then we have the short message service function, SMSF, that is similar to the, that is having the same functionality that was earlier discussed when it talked in terms of IMS, right.
Then we have the network data analytics function, then we have the network data analytics function, that we need analytics to provide better services to the end user. Next up, we have the point-to-point interface-based architecture. Well, the point-to-point interface-based architecture is the similar sort of architecture that we have already discussed when we talked about the 4G components or the 4G architecture in the previous course. So, what is this point-to-point architecture, right. So, the P2P architecture is essentially designed to provide a direct and dedicated communication link between the two devices, allowing them to exchange data without interference from the other devices that is present in the network.
This architecture is widely used in mobile networks, such as the 4G, and then we have, similarly in 3G also, we had the P2P architecture. Then we have some key points that I need to emphasis while we talk about the P2P interface-based architecture. The P2P interface architecture is a sort of direct communication link between two devices in contrast to the service-based architecture used in the 5G networks, which provides a more flexible and modular framework for deploying new services and applications on the network. In P2P architecture, each device has a dedicated point-to-point interface, which allows them to exchange data without interference from other devices.
This helps to reduce the network latency and improve network performance. The P2P architecture is widely used in mobile networks, such as the 4G, where it is used for communication between the E-NodeB and the MME. Well, the E-NodeB is responsible for managing radio resources, but that is basically our RAN, and MME, or the Mobility Management Entity, is responsible for managing the mobility of the user equipment. In P2P architecture, the E-NodeB and MME are connected through a point-to-point interface, which is used to exchange control plane and user plane messages.
The control plane messages are used for signaling, and the user plane messages are for data transmission, obviously. The P2P interface-based architecture is known for its simplicity and efficiency, making it a popular choice for communication systems that require high-performance and low-latency communication links. Well, to summarize, the point-to-point architecture is a network architecture which is used in many def-com systems, including mobile networks. It provides a direct and dedicated communication link between two devices, allowing them to exchange data without interference from the other devices. The P2P architecture is widely used in mobile networks, such as the 4G, and in 5G also, as we can see its extension, and is known for its simplicity and efficiency.
As we can see, we have the similar set of network functions, that is 5G, equipment entity registers, then we have the GMLC, UDM, LMF, NSSF, then we have SMF. All these things are service-based, connected here with the service-based interfaces. Then again, here, the same network functions are sort of connected with the point-to-point architecture. For example, we have the N11 interface between the AMF and the SMF. We have the N14 interface, that is a connection between two AMFs, right? Then we have the N3 tunnel, that goes from the UPF towards the IWF, right?
And then, or I can say towards the device. Then we have the N6, that is from the UPF towards the CDN, or the data networks. Then we have, let's say, N10 interface between SMF and the UDM. Then we have N8 interfaces, right? So, there are a lot of, there is a similar concept with respect to the service-based architecture only. The thing is that we have point-to-point interface names when we talk about point-to-point interface-based architecture. It's just, it's the same architecture, just in a different dressing, that's it.
Then we'll talk about different deployment modes or scenarios along with SSC modes. Well, first understand, with respect to 5G core and EPC, 5G core architecture is newly introduced architecture that comes with the 5G networks, which is service-based, right? And it provides support for new use cases, such as IoT and ultra-reliable low-latency communications, or URLLC. On the other hand, EPC is the core network architecture that was used in 4G networks. Now, let us look at the possible deployment scenarios that can come along. First thing is the NSA, right?
That is the non-standalone 5G deployment. In this deployment scenario, what we have is the 5G radio access is deployed alongside existing 4G EPC. As we can see, we have the NR here, and it is connected to the EPC. So, that is sort of a non-standalone, wherein the existing core is kept same. However, the radio link or the radio is provided by the millimeter wave, or we can say the new radio connections that comes with NR, right? It's an updated version of RAN that we have, we used to have, right?
Node-B. Earlier, it was E-Node-B. Now, it is G-Node-B. So, this allows the 5G network to use the existing EPC, as I told, for control plane signaling, while the user plane traffic is carried by the 5G RAN. This is a quick way to roll out 5G networks. Why? Because operators are sort of hesitant, right? When we talk about all these existing deployment scenarios that we see around us, right, everything is connected with a 4G core. For example, we have GEO that has altogether a 4G deployment. Throughout, they have all the 4G core components deployed across the country.
When we talk about deploying into 5G architecture or the 5G services in a certain area, we cannot go ahead and change the core. Because, you see, the core is, the core can handle a lot of radio accesses together. But we, and it is very, very unnecessary to change the core quite frequently, right? And it comes with a cost. It's a huge cost that comes with it. So, the operators are sort of reluctant to go ahead and change those deployments or the core deployments. So, what is the quickest way to solve this problem?
The quickest way is to come up with a new radio access and then connect it directly to the existing 4G cores, right, or EPC. Next up is the standalone deployment or the SA deployment for standalone 5G architecture. It's like we will be having the NR or the G node base that gets connected to the 5G core, right? In this deployment scenario, the 5G core is deployed alongside the 5G RAN, which allows the network to fully utilize the capabilities of the 5G core, including the support for new use cases such as network slicing, virtualization, and edge computing.
This deployment, of course, requires the deployment of a new core network, which increases the cost and complexity of the network. Then we have the DC or the dual connectivity, right, where both the UE is connected to both the 4G and the 5G RANs, allowing for improved performance and reliability, right? As we can see here, as we can see here, a UE is connected to 4G and 5G at the same time. It can connect. Same goes for, but again, this can go for EPC or 5G core.
Doesn't matter. But the DC connectivity means that UE can seamlessly move between 4G and 5G. If there are, like, we assume we are in an area where there are both E0Bs and G0Bs around, so the UV should be able to move seamlessly between the LTE and NR, right. Then we have multi-connectivity scenario. In this, the UV is connected to multiple RANs, which can include 4G, 5G, and Wi-Fi networks. Obviously, this allows for even higher performance and reliability, which we see, right, we can switch between, say, at our home, we have Wi-Fi access points.
Now, we have voiceover Wi-Fi. We'll be using the Wi-Fi to, you know, connect to the code instead of connecting to the nodes or node Bs that is provided by the operators. So, that gives better, you know, performance, higher bandwidth, and then better call quality as well. Then we have interworking. In this scenario, the 5G network is interconnected with other types of networks, such as 4G, Wi-Fi, or fixed-line networks. This allows for seamless connectivity between different networks, right, providing a better user experience. In summary, there are several deployment scenarios when we talk about these possible deployment scenarios with respect to 5G core and EPC, including NSA, NSA, dual connectivity and multi-connectivity and interworking.
However, each deployment scenario has its own advantages and disadvantages. The choice of deployment scenario depends on specific requirements of the network and the use cases that it can support. I mean, I'm talking about 5G. We can have an NR that is connected to an EPC, basically NSA deployments. It is easier that way. So, this is basically what I have discussed. It's 5G with evolve packet core. Then we have NR and EnodeB with EPC as the core, something like that. So, next up is the SSC modes or the session and service continuity modes that are used in 5G.
Well, SSC modes are used in 5G to ensure that an uninterrupted continuity of services for users are maintained across different network coverage areas. In addition to EPS fallback mode and 5G NSA mode, there are three other SSC modes in 5G, which are SSC mode 1, 2, and 3, which we'll be talking in this lecture. Note. First point is the SSC mode 1 that considers a single UPF as an anchoring point, that means an existing IP address is kept for the current session. Well, this mode is used when the UE or the user equipment is moving between different 5G radio cells within the same PLMN.
The handover between the cells is performed using the same frequency band and a different beamforming pattern. which allows for a seamless handover of the session and service without any interruption. So, next we have SSC mode 2. This mode is used when the UE is moving between 5G and our cells using different frequency bands or different 5G radio bands within the same PLMN. The handover between the cells is performed using dual connectivity or the DC, which allows for simultaneous connection to both source and target cells, ensuring uninterrupted continuity of services.
So, as we can see here, it's different radio nodes, right? And the UE is moving. So, we have two different UPFs that is servicing these two different radio nodes, right? And the UE is moving from one radio node to another radio node. So, since the UPF is different here, so the new IP address is required and hence, since the anchoring point is changing, a new IP session required to be set up. Next is SSC mode 3. This mode is used when UE is moving between different PLMNs or different radio technologies.
So, it can happen that the handover between the networks is performed using multi-connectivity, which allows for simultaneous connection, though, to both source and target networks, ensuring uninterrupted continuity of services. Here, the only thing that is making this connection different from other SSC mode is that the existing IP session is kept and a new IP session is set up only after that the old IP session is released, right? So, it's like re-establishment and then release. So, the UE receives a seamless connection and it can maintain the connectivity, right?
So, to conclude, for SSC mode 1, 2, and 3 are used in 5G to ensure that there is an uninterrupted continuity of services as users move between different coverage areas of the network. SSC mode 1 is used for handovers between 5G radio cells within the same PLMN. SSC mode 2 is used for handovers between 5G radio cells using different frequency bands. So, understand, the frequency band is different and that has to be within the same PLMN and for SSC mode 3, it is used for handovers between different PLMNs or it can happen all together across different tracks, right?
Next up, we have different 5G core components. So, when we talk about different 5G core components, we have a lot of network functions in mind, like we have AMF, PCF, CHF, NRF, UDM, right? Then we have the analytics function, then we have the, let's say, the SMS management function, right? A lot of functions are there, but here we will be talking about some key core components. So, the first component that comes in our mind, as we can see, is the access and mobility management function. Well, the access and mobility management function, or commonly known as the AMF, in 5G core is responsible for managing the access and mobility of the user equipment.
It sort of performs the function, I remember, for, I can say, it's 4G, we had MME, right? So, it performs similar sort of functions, although the functionality is now split between AMF and SMF, right? For mobility, it is maintained by AMF, for SMF, it takes up all the session management functions, right? So, as I was saying, that AMF is a network function in 5G core that is responsible for managing the access and mobility of the user equipment. It performs various functions that is related to the UV, like registration, authentication, security, mobility, and session management.
Some of the key functions of AMF are UV registration, right? When a UV connects to the network, the AMF is responsible for verifying its identity, authenticating it, and hence, registering it with the network. Then, we have the security management. The AMF is responsible for managing the security of the UV by generating and distributing the security keys, and hence, ensuring the integrity and confidentiality of the user data. Then, we have the commonly used mobility management. Therein, we have that AMF is sort of responsible for managing the mobility of the UV by tracking its location, ensuring seamless handovers between cells, and not only cells, it could be across 5G radios also.
Eventually, it turns out to be cells, but from different radio nodes. And managing the selection of best available access network. Then, we have session management. It is responsible for managing the communication sessions between UV and other network functions and services. So, in short, AMF interacts with other network functions in the 5G code, such as the UOSA plane function or the UPF. Then, we have the session management function or SMF. And the authentication server function, that is the AUSF, to provide a seamless and secure experience for the UV.
In addition, AMF also supports various mobility scenarios, such as NSA mode, then the standalone mode, then we have the DCNR mode, which allows for different levels of integration between 4G, 5G networks. So, overall, AMF sort of plays a very crucial role in the 5G code by maintaining the access and mobility of the UV and ensuring a seamless and secure experience for the user. Its functions are really essential for efficient operation of the 5G network and delivery of new and innovative services. Well, as I was saying, so, in short, AMF maintains the signaling call flows in the network, right?
And also ensures that the signaling is also encrypted, like the NAS functions, right? We have the 5G NAS that is between AMF and UV now. Then, different functions like switching from idle to active, all these things. So, we can see, like, the dimension to which AMF is connected. AMF is connected to the UDM, it is connected to the AUSF, connected to the UDR, for, then we just connected to the SMF, then NRF, right? Connected to the UV, it is not connected to the UPF, but then, yeah, it is connected to the radio node, right?
The NGAAP interface. So, that's it from AMF side. So, I will be stopping the recording and then proceeding for the new recording.