Week 3

Objective:

Extract the midsurface for the given sheet metal component(shown below) and used meshing tools in ansa to create mid-mesh with appropriate quality criteria

Step-1: geometry clean up

needle faces, single cons, triple cons, collapsed cons are cleared using autofix in geometry checks dialog box.

all errors are fixed

Step-2:Orientation

Step-3: set the quality criteria as given

step-4: extract midsurface

since the part has constant thickness skin option is used to extract the mid surface, alternatively face offsety is also used to get the midsurface

step-5: meshing

surfaces are trimmed and joined to get better mesh flow and quality.

1.unwanted edges are remoed as shown below to get good quality mesh with better flow

2. since some faces are symmetric only onle half of the geometry is taken and meshed to save time

once meshing of half the part is completed it as reflected using transform->symmetry option and then combined using topo and remaining surfaces are meshed.

the process is repeated till are parts are meshed

a.hinge reinforcement

b.class B-surface

c. class A-surface(outer part)

completely meshed part:

note:please find the attached ANSA model for reference.