Write a python program for the PV plot and calculation for thermal efficiency of Otto Cycle

OBJECTIVE- Write a python program for the PV plot and calculation for thermal efficiency of Otto Cycle

DESCRIPTION-

Otto Cycle - Otto Cycle is a idealized thermodynamic cycle, that describes the functioning of a typical spark ignition piston engine. The Otto cycle is the name of the cycle used in spark ignition internal combustion engine such as hydrogen and gasoline fuelled automobile engine. The Otto cycle consists of following processes-
1. Process 0-1 a mass of air is drawn into piston/cylinder arrangement at constant pressure.
2. Process 1-2 is an adiabatic(isentropic) compression of the charge as the piston moves from bottom dead centre(BDC) to top dead centre(TDC)
3. Process 2-3 is a constant volume heat addition to the working gas from an external source while the piston is at top dead centre. This process is intended to represent the ignition of the fuel-air mixture & the subsequent rapid burning.
4. Process 3-4 is a adiabatic(isentropic) expansion (power stroke).
5. Process 4-1 completes the cycle by a constant-volume process in which heat is rejected from the air while the piston is at bottom dead centre.
6. Process 1-0 the mass of air is released th the atmosphere in a constant pressure proces

Efficiency of the cycle- The theoretical efficiency of the Otto cycle deoends on the compression ratio and the specific heat ratio γ of the gas in the combustion chamber.
Compression ratio(r) is the ratio of the volume of the cylinder & the combustion chamber when the piston is at the bottom, & the volume of the combustion chamber when the piston at the top.For better fuel efficiency & fuel economy automobiles are to be designed with higher compression ratio. However, the compression ratio of Otto cycle engines is limited by the need to prevent the uncontrolled combustion known as knocking. Modern engines have compression ratio in the range of 8 to 11, resulting in ideal efficiency of 56% to 61%.
r = Vmax/Vmin = V1/V2
Specific Heat Ratio(γ) of a gas is the ratio of specific heat at constant pressure Cp to the specific heat at constant volume Cv.
γ = Cp/Cv

PYTHON CODE FOR OTTO CYCLE

#0tto cycle using engine kinematics
#importing necessary libraries

import math
import matplotlib.pyplot as plt

#Defining the function for engine kinematics
def otto_standard_cycle (bore, stroke, con_rod, cr, start_crank, end_crank):

	a = stroke/2
	R = con_rod/a

	# Volume parameters
	V_s = math.pi*(1/4)*pow(bore, 2)*stroke
	V_c = V_s/(cr-1)

	# Crank angle
	SC = math.radians(start_crank)
	EC = math.radians(end_crank)

	#Number of data points to be taken for the varying angle
	num_values = 50

	#Calculating theta
	dtheta = EC-SC/ (num_values-1)

	#creating an empty array
	V = []

	#Calculating theta in the array
	for i in range (0, num_values):
		theta = SC + i*dtheta
		term1 = 0.5*(cr-1)
		term2 = R + 1 - math.cos(theta)
		term3 = pow(R, 2) - (pow (math.sin(theta),2))
		term4 = pow(term3,0.5)
		V.append((1 + term1*(term2-term4)) * V_c)
	return V


#Main function
#Inputs
p1 = 101325
t1 = 600
gamma = 1.4
t3 = 2600


#Geometric parameters
bore = 0.1
stroke = 0.1
con_rod = 0.15
cr = 14

#Volume parameters
v_s = math.pi*(1/4)*pow(bore, 2)*stroke
v_c = v_s/(cr-1)
v1 = v_c + v_s

# state process 2
v2 = v_c
p2 = p1*pow( v1,gamma)/pow(v2,gamma)
rhs = p1*v1/t1
t2 = p2*v2/rhs


#Compression process
#Calling the function defined above
V_compression = otto_standard_cycle (bore, stroke, con_rod, cr, 180, 0)
Constant = p1*pow(v1,gamma)
#p_compression*v_compression^gamma = constant
P_compression = []
for V in V_compression:
	P_compression.append(Constant/pow(V,gamma))

# state process 3
v3 = v2
rhs =p2*v2/t2
p3= rhs*t3/v3

#expansion process
V_expansion = otto_standard_cycle (bore, stroke, con_rod, cr, 180, 360)
Constant = p3*pow(v3,gamma)
P_expansion = []
for V in V_expansion:
	P_expansion.append(Constant/pow(V,gamma))


# state process 4
v4 = v1
p4 = p3*pow(v3, gamma )/pow(v4, gamma)
t4 = p4*v4/rhs


#Thermal Efficiency using temperatures
n = 1 - ((t4-t1)/(t3-t2))
print(n)

#plot PV daigram
plt.plot([v2,v3], [p2,p3],'-b', label='Heat Addition')
plt.plot(V_compression, P_compression,'-r', label='Compression')
plt.plot (V_expansion,P_expansion, '-y', label='Expansion')
plt.plot([v4, v1], [p4,p1], '-g', label='Heat Rejection')
plt.legend()
plt.xlabel( 'Volume, m^3')
plt.ylabel('Pressure, Bar')
plt.title('Otto cycle Constant PV daigram')
plt.grid()
plt.savefig('Otto cycle Constant PV daigramS')
plt.show()

Explanation of code

1. First of all import all the libraries & define thr function for Piston_Kinematics and its all the parameters.
2. Give all the inputs , state variables and Engine geometric parameters.
3. Than define the formula of the swept volume and clearance volume.
4. Give the relation between V1 & V2, and define the state inputs of point 2.
5. Now with the help of this function define compression, and than define the state points of state 3 using property equation & mention them in comments.
6. Now similarly define the expansion with the help of same function & give the state points of state 4.
7. Mention the thermal efficiency formula.
8. Now using plot command write the variables, color of line, legends, labels and title of the plot.
9. Now save the program & run thr program.
10. Record the output plot displayed and find out thermal efficiency

Results- The above program generates the following plots

Conclusion

1. The thermal efficiency was calculated to be 65.202%.
2. P-V diagram clearly shows that changes in isentropic processes are a curve not a straight line.

The link of the project entitled-

An Otto Cycle P-V plot and calculation of thermal efficiency using Python is

https://skill-lync.com/projects/write-a-python-program-for-the-pv-plot-and-calculation-for-thermal-efficiency-of-otto-cycle