Section Modulus calculation and optimization

BUTTERFLY VALVE IS MOUNTED ON FLANGES OF PIPES BOTH SIDES WITH RESPECTIVE OF DATUMS A,B,C,D. LEVER CONTROLS THE FLOW OF FLUID IN VALVE.

ROOF DESIGN :- It is top frame part of car which give protection to passengers from sunlight, snow and rain. It is designed in mainly 6 parts 1.Top Outer Roof 2.Front Rail Roof 3.Bow Roof 4.Center Reinforced Roof 5.Rear Rail Roof Quantity of Bow roof may change according to Length of roof.   Design conditions: - Ditch…

FENDER DESIGN Fender is part of automobile that frames a wheel well. Its primary purpose is to prevent sand, mud, rocks, liquids and other road spray from being thrown into air by the rotating tire. When vehicle is moving, tyres pick up stones and others and hurl them in all directions. Fenders are basically preventing…

Section Modulus can be increased by changing angle for emboses Section Modulus Caliculation Section 1 : Moment of Inertia of section 1 = 5.089 mm Length of Hood Section = 3.94 mm Section Modulus =5.089/3.94 = 1.29 mm3 Section 2 : Moment of Inertia of section 1 = 8.27 mm Length of Hood Section = 9.80 mm Section Modulus…

Wheel Arc length data according to European Standard. WHEEL ARC LENGTH DATA ARC NAME ARC LENGTH SA 514.8 SB 682.03 SC 241.4 SD 203.85 SE 165.73

hood design

 Underbody coating:- What is Underbody Coating ? Underbody coating is uniform paint coating to different inner parts which are different for different country standards. Underbody coating provides is long term protection provides for internal body panels, frame and other inner cavities that are not physically accessible…

Car requirement conditions: - Suitable for family of minimum 5 members Suitable elderly and children. Suitable for long journey ex. extra luggage and necessities Price range between 8 to 10 lacks Higher city milage required. Car model No of seats Transmission Boot Space   In Ltrs (MAX) Milage/    City…