Project

Lithium-ion battery Types SP SE SF LS CS PF Lithium Cobalt Oxide L H L L L M Lithium Manganese Oxide M M M L L L Lithium Nickel Manganese Cobalt Oxide M H M M L M Lithium Iron Phosphate H L H H L M Lithium Nickel Cobalt Aluminum Oxide M H L M M M Lithium Titanate M L H H H H

                                                      PROJECT-1     SIMULINK MODEL FOR BAJA ATV WITH CVT:     Major components in the model: Continuously Variable Transmission…

                                                      1ST QUESTION   Implement control logic of a “washing machine” using State flow as per given sequence:  If the…

1st question : PS-Simulink and Simulink-PS converter, Scopes, Displays, Pulse generator, electrical and mechanical references, solenoid, Battery, switch, ideal Transalation motion sensor, solver configuration. These are the following simscape and Simulink blocks that are going to use in this simulation.   PS-Simulink…

                                                           PROJECT - 2 CODE:   int trigPin = 2; // initialize Trigger pinint echoPin = 4; // initialize Echo pinlong duration, cm, inches; //declare the variableslong sum=0;long avg;int i; void setup() // one time run the loop { Serial.begin (9600); //used for serial monitor…

                                                           PROJECT - 2 CODE:   int trigPin = 2; // initialize Trigger pinint echoPin = 4; // initialize Echo pinlong duration, cm, inches; //declare the variableslong sum=0;long avg;int i; void setup() // one time run the loop { Serial.begin (9600); //used for serial monitor…

                                                           PROJECT - 2 CODE:   int trigPin = 2; // initialize Trigger pinint echoPin = 4; // initialize Echo pinlong duration, cm, inches; //declare the variableslong sum=0;long avg;int i; void setup() // one time run the loop { Serial.begin (9600); //used for serial monitor…

                                                           PROJECT - 2 CODE:   int trigPin = 2; // initialize Trigger pinint echoPin = 4; // initialize Echo pinlong duration, cm, inches; //declare the variableslong sum=0;long avg;int i; void setup() // one time run the loop { Serial.begin (9600); //used for serial monitor…

                                                           PROJECT - 2 CODE:   int trigPin = 2; // initialize Trigger pinint echoPin = 4; // initialize Echo pinlong duration, cm, inches; //declare the variableslong sum=0;long avg;int i; void setup() // one time run the loop { Serial.begin (9600); //used for serial monitor…

1a) Slave.   #include#includeLiquidCrystal lcd(13,12,5,4,3,2);void setup(){Serial.begin(9600);lcd.begin(16,2);Wire.begin(1);Wire.onReceive(myfunction);}void myfunction(int p){int a=Wire.read();lcd.setCursor(4,0);lcd.print(a);delay(500);} void loop(){ } 1b). Master.   #includevoid setup(){Serial.begin(9600);Serial.println("master");Wire.begin();}…

1a) Slave.   #include#includeLiquidCrystal lcd(13,12,5,4,3,2);void setup(){Serial.begin(9600);lcd.begin(16,2);Wire.begin(1);Wire.onReceive(myfunction);}void myfunction(int p){int a=Wire.read();lcd.setCursor(4,0);lcd.print(a);delay(500);} void loop(){ } 1b). Master.   #includevoid setup(){Serial.begin(9600);Serial.println("master");Wire.begin();}…

                                                           PROJECT - 2 CODE:   int trigPin = 2; // initialize Trigger pinint echoPin = 4; // initialize Echo pinlong duration, cm, inches; //declare the variableslong sum=0;long avg;int i; void setup() // one time run the loop { Serial.begin (9600); //used for serial monitor…

                                                           PROJECT - 2 CODE:   int trigPin = 2; // initialize Trigger pinint echoPin = 4; // initialize Echo pinlong…

1a) Slave.   #include#includeLiquidCrystal lcd(13,12,5,4,3,2);void setup(){Serial.begin(9600);lcd.begin(16,2);Wire.begin(1);Wire.onReceive(myfunction);}void myfunction(int p){int a=Wire.read();lcd.setCursor(4,0);lcd.print(a);delay(500);} void loop(){ } 1b). Master.   #includevoid setup(){Serial.begin(9600);Serial.println("master");Wire.begin();}…

1a) Slave.   #include#includeLiquidCrystal lcd(13,12,5,4,3,2);void setup(){Serial.begin(9600);lcd.begin(16,2);Wire.begin(1);Wire.onReceive(myfunction);}void myfunction(int p){int a=Wire.read();lcd.setCursor(4,0);lcd.print(a);delay(500);} void loop(){ } 1b). Master.   #includevoid setup(){Serial.begin(9600);Serial.println("master");Wire.begin();}…

1a) Slave.   #include#includeLiquidCrystal lcd(13,12,5,4,3,2);void setup(){Serial.begin(9600);lcd.begin(16,2);Wire.begin(1);Wire.onReceive(myfunction);}void myfunction(int p){int a=Wire.read();lcd.setCursor(4,0);lcd.print(a);delay(500);} void loop(){ } 1b). Master.   #includevoid setup(){Serial.begin(9600);Serial.println("master");Wire.begin();}…

1a) Slave.   #include#includeLiquidCrystal lcd(13,12,5,4,3,2);void setup(){Serial.begin(9600);lcd.begin(16,2);Wire.begin(1);Wire.onReceive(myfunction);}void myfunction(int p){int a=Wire.read();lcd.setCursor(4,0);lcd.print(a);delay(500);} void loop(){ } 1b). Master.   #includevoid setup(){Serial.begin(9600);Serial.println("master");Wire.begin();}…

1a) Slave.   #include#includeLiquidCrystal lcd(13,12,5,4,3,2);void setup(){Serial.begin(9600);lcd.begin(16,2);Wire.begin(1);Wire.onReceive(myfunction);}void myfunction(int p){int a=Wire.read();lcd.setCursor(4,0);lcd.print(a);delay(500);} void loop(){ } 1b). Master.   #includevoid setup(){Serial.begin(9600);Serial.println("master");Wire.begin();}…

1a) Slave.   #include#includeLiquidCrystal lcd(13,12,5,4,3,2);void setup(){Serial.begin(9600);lcd.begin(16,2);Wire.begin(1);Wire.onReceive(myfunction);}void myfunction(int p){int a=Wire.read();lcd.setCursor(4,0);lcd.print(a);delay(500);} void loop(){ } 1b). Master.   #includevoid setup(){Serial.begin(9600);Serial.println("master");Wire.begin();}…

1a) Slave.   #include<Wire.h>#include<LiquidCrystal.h>LiquidCrystal lcd(13,12,5,4,3,2);void setup(){Serial.begin(9600);lcd.begin(16,2);Wire.begin(1);Wire.onReceive(myfunction);}void myfunction(int p){int a=Wire.read();lcd.setCursor(4,0);lcd.print(a);delay(500);} void loop(){ } 1b). Master.   #include<Wire.h>void…

                                         v&v 2nd project

                                          Test features required by the customer:       Test feature 1: When long pressed the power button of the phone shall switch on with a company logo at the…

  .{Implement the Code for controlling the retraction and extension of Airplane’s landing gear}.   #include void Initiate_State_Machine();void GearDown();void CheckingBeforeTakeOFF();void RaisingGear();void GearUp();void CheckBeforeLanding();void LoweringGear();static void(*statetable[])(void)={GearDown, CheckingBeforeTakeOFF,…

  .{Implement the Code for controlling the retraction and extension of Airplane’s landing gear}.   #include void Initiate_State_Machine();void GearDown();void CheckingBeforeTakeOFF();void RaisingGear();void GearUp();void CheckBeforeLanding();void LoweringGear();static void(*statetable[])(void)={GearDown, CheckingBeforeTakeOFF,…

 .{easuring distance of an object using ultrasonic sensor (HC-SR04)}.   avr project-2.c * * Created: 8/29/2022 2:23:43 AM * Author : srinivas */ #define F_CPU 8000000UL#include <avr/io.h>#include <avr/interrupt.h>#include <util/delay.h>#include <string.h>#include <stdlib.h> #define…

  .{Implement the Code for controlling the retraction and extension of Airplane’s landing gear}.   #include <stdio.h>void Initiate_State_Machine();void GearDown();void CheckingBeforeTakeOFF();void RaisingGear();void GearUp();void CheckBeforeLanding();void LoweringGear();static void(*statetable[])(void)={GearDown,…

PROJECT-1 AIM:   {Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running status of motor on the LCD Display}.   AVR PROJECT-1.c * * Created: 8/28/2022 6:43:45 PM * Author : srinivas */ #include <avr/io.h> #define F_CPU 16000000L #include…