Project 2 - MODELLING, ANALYSIS & DESIGN OF COMPOSITE STUCTURES IN COMFLOR & ETABS

What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. Building Information Modelling (BIM)- Building information modeling (BIM) is a process supported by various tools, technologies and contracts involving the generation and management of digital representations of physical and functional…

1) From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately     AIM:- To create a new project from the file menu and need to name the project appropriately.     INTRODUCTION:- For creating a project, select a template from the Projects list or the New Project dialog…

 AIM : A 30 - 40hr project on modelling, analysis & design of a state-of-the-art tall composite building using ETABS software. The composite members to be designed using Comflor software. Key Highlights: a. Modelling The structural model prepared for the project 1to be used for the project 2. Prepare two distinct structural…

Aim: To model a tall building in ETABS for the given architectural drawing along with the given parameters and to design their frame elements.   Procedure in ETABS modeling: a) Column spacing and wall spacing marking in the architectural drawing b) Story assignment   c) Grid assignment   d) Material assignment   e) Frame…

AIM : To develop a model as per the given plan and analyze and design the structure. TOOLS USED : Paint. Manage property sets. Construction levels. Grids. Columns. Beams. REports. Model report. Show report. Interactive design. Slabs on beams. Frames. Roof panels. Wall panels. Loads. Loadcases. Seismic wizard. PROCEDURE…

AIM:- to generate the  report  for the steel  building design Procedure:- Open the Tekla model Now go to report option from the ribbon and select model report Now select the load cases and combinations summary to obtain report Click on the show report to obtain report We can change the project name , address etc with …

Aim: To design the slab and foundation of the model Procedure: Open the saved Tekla model Generate the same load combinations again. Designing of Slab Click any one slab and change its properties like rib type, type, bar spacing and bar size Now right click on any one slab and select the design member. If the member shows…

Aim:- to run the analysis of the structure and design reinforced concrete beam and column procedure:- open the tekla model and run the analysis  now select any of the column member and right click on it then select the interactive design from the given option check whether the member is passing through all the design checks…

Aim: To generate seismic loading based IS codal provisions and zone II. Procedure: Open the previously save Tekla model Now go to the load cases and add the seismic load case, and click ok Now go to the seismic wizard and select code specta and click Next. Now enter the zone and click Next Now we have to enter the structure…

Aim:- to calculate the dead load as per the design and IS code specifications Given data:- thickness of the floor finish is 50mm assume the thickness of the exterior wall as 230mm assume the thickness of the interior wall as 150mm Calculation of dead load dead load due to floor finish thickness of the floor finish is 50mm…

AIM: To create a new file in TSD and set up the settings for a steel building the covers for the members to be as per the following to be input: - MEMBERS IN CONTACT WITH GROUND ABOVE GROUND Beam 30mm 25mm Column 50mm 40mm Slab 30mm 25mm Pile cap 75mm   Foundation 50mm   INTRODUCTION: tekla has option of predefining the…

AIM: To analyze and design a steel building to 10T CRANE as per IS standard code using TEKLA STRUCTURAL DESIGNER. INTRODUCTION: Tekla Structural Designer is an integrated model-based 3D tool for analysis and design (of both concrete and steel members) in multi-material structures. Features include interactive modeling,…

Aim: To summarise the study for bending moment, shear force and deflection diagrams for the elements of the model Bending Moment Bending Moment refers to the bending of member due to the applied forces. Now in our figure, we can see the simply supported beams subjected to certain uniformly distributed load and the bending…

Aim - Generate manual wind loading in the design report based IS code as per the following input Basic wind speed = 39 m/s Terrain category = 2 Procedure - First calculate load combination  Result - Calculations are done for the wall panel   2) Aim - Based on the above calculation apply the loading on the model Procedure…

Aim: To Calculate dead load in design report based on IS code and apply dead load on the model Procedure: Load calculations: Dead Load=1.2knm21.2knm2 Finishes=500mmx24knm3knm3=1.2knm21.2knm2 Brick wall load =0.15x20x5.2=15.6knm2knm2(Ground to intermediate floor) Brick wall load =0.15x20x6.8=20.5knm2knm2(intermediate floor…

1. AIm: To Create beam properties for the First floor and model the beams. Procedure: Open the Tekla structure software  And then open the week2 challenge file. Now go to levels and select intermediate floor Now go to manage property and create the new beam  And then model the beam. Now Model the secondary beams in the…

To model columns for industrial steel structure using TSD Introduction Tekla Structural Designer is an integrated model-based 3D tool for analysis and design (of both concrete and steel members) in multi-material structures. Features include interactive modeling, automated structural analysis and design, drawing, and report…

1)  Aim - To summarize the user interface in TSD for the following items  Project Workspace - Open the Tekla structural designer software and click on New option and the new model workspace will appear Now all the ribbons and menu bars are visible Scene Content - Select window tab and then click on scene content The scene…

AIM OF THE PROJECT- Creating a 3D rendered model for a Residential Building in AutoCad.   INTRODUCTION- COMMANDS USED FOR DRAWING THE 3D RENDERED VIEW OF BUILDING ARE AS FOLLOWS. -         Extrude- Location: Draw > Modeling > Extrude This AutoCAD 3D Extrude command allows the user to create a 3D object by extruding a 2D…

   AIM:- To create a 3D isometric view of the given building with plan and elevation.    INTRODUCTION:-  An isometric drawing is a 3D representation of an object, room, building or design on a 2D surface. One of the defining characteristics of an isometric drawing, compared to other types of 3D representation, is that…

1.AIM         To create a 3D Furniture elements using the various commands in Auto CAD. INTRODUCTION BY 3D VIEW The process of creating a mathematical representation of any surface of an object in three dimensions by using special software. A 3D model can even be represented as a two dimensional image by using the 3D …

AIM: To Create a layout of the plan and section A of the project in challenges 7 . PROCEDURE:  In the command prompt type units > mm> decimal In the command prompt type limax >100,100 In the command prompt type limits>0,0 In the command prompt type layout > template>Tutorial arch .m  In the command prompt type Ms to specify…

Aim: To Create the Kitchen Layout and to Also, use proper dimension techniques to dimension the kitchen layout. Also, insert text wherever required. All dimensions are in mm. Procedure: step 1: units are set to mm limits and limax are also set zoom comand is also used Steps for drawing Below Counter Plan Open Auto Cad…

AIM: To Create Custom1_titleblock and Custom2_titleblock using Attributes and block command from Autocad software . PROCEDURE: Step 1 ( custom1_tittleblock) In the command prompt type L to draw the lines  In ribbon tab > Annotate > Mtline ( to draft the text ) go to properties tab to change the colour  In the riibon bar…

Aim: To draw residential building of dimensions 55’X60’ with following drawings Plot drawing Ground Floor Plan First Floor Plan Elevation Center line drawing Footing Layout Beam Layout Section View Introduction: The residential building to be drawn with plot dimensions 55’X60’. The plinth dimensions are chosen as 35’X40’.…

    Aim:- To draw the floor plans and sections using the proper dimension techniques and dimension styles to document the project.     Introduction:- Plan and Sections are different types of drawings used by architects to graphically represent a building design and construction. A plan drawing is a drawing on a horizontal…

1. AIM: To draw the elevation and details of a wardrobe as shown in the figure. After sketching, you need to provide the dimensions and text with the use of layers. PROCEDURE: STEP 1: Units are set to mm Limits and limax are also set Zoom command is also used STEP 2: In the command line type rec > 2800,2600 In the command…

  AIM:  To Create a column schedule as shown in the figure: PROCEDURE: STEP1 In the command prompt type line to create tables  In the command prompt type ST (text style) > romans.shx (font name) > 8" (height) > left (justify) In the command prompt type text to text the given text in the drawing …

Aim:To draw the layout of a residence plan. Commands used: XL-V OR XL-H. Offset. Fillet. Extend. Trim. Procedure: First create a new AutoCAD file with imperial settings. Make sure that in units the type is "Engineering" (as the dimension is in feet and inches) and also set the precision. Set the limits with command "LIMITS"…

AIM: To draw the given sketches in autocad. INTRODUCTION: autocad offers various tools like rotate,chamfer,fillet,move,offset etc to ease thr sketching process.  PROCEDURE: DRAWING 1: 1.Open new file and set decimal and precision to 0.00. 2.Command line: From random point draw 3.00 m line and @2.12

AIM:  To Creating a Floor plan, Footing detail and Isometric view using AutoCAD. INTRODUCTION: The main objective of this assignment is to get in touch with various tools in AutoCAD like the rectangle, polylines, modifications tools like copy, move, offset and modes like snap mode and ortho mode. These tools will be understood…

Note: Use the Imperial Template and the Decimal Units to draft the features. Dimensions are there for references.   AIM: (A) To Create the geometries from P1 to P2 using all the coordinates system methods and P3 to P10 by any one coordinate system (B) To Draw the profile and the trusses using any coordinate system methods.…

AIM : To prepare a residential plan for G+1 floor according to vaastu shastra and to calculate corresponding loads for components of house  PROCEDURE: DETAILED INTRODUCTION The total land area considered for the residential plan is 9.5mx18m or 171sq.mtrs or 4.22541cents PLAN FOR GROUND FLOOR AND FIRST FLOOR IS SHOWN Ground…

AIM: To Calculate the Concrete Mix Design for M35 grade concrete with fly ash & M50 grade concrete without Fly ash   INTRODUCTION: Concrete mix design is the method of finding the precise proportion of cement, sand and aggregates for concrete to achieve the target strength in structures, therefore concrete mix design can…