Creation of Column Schedule and Drawing Template using AutoCad
- AIM :
1. Create a column schedule as shown in the figure.
Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text.
Hint: Use font name: romans.shx; Height: 8”, Justify: Left
SOFTAWARE USED : AUODESK AUTOCAD 2021- PROCEDURE :
first the open the software
give the command QNEW and press the ENTERE key
click on imperical templete
select ADVANCE SETUP
unit : Engineering, precision :0.00
angle :decimal degree , precision :0.00
angle measure : East
angle direction : closkwise
area : 20*20
and finished , lets start
command : D (dimension style manager )
click on :MODIFY
select : TEXT option
selct text style : romanc.shx
command : dt (for text )
select start point
height : 8"
angle :0
justify : left
press : ENTER
prepare a table and write all texts in table
go to the layer properties
create two layers
for table
colour : cyan
for text
colour: yellow
command : REC ( for rectangle )
press : ENTER
COMMAND : o (for ofset )
distance : 3"
command :c (for circle )
mode : tan, tan, radius
select two tangent
radius :1"
command : MI (for mirror )
mirror this circle
command :x (for explode )
select the object
press : ENTER
Command : divide
select the line
segment :4
coppy and circle and place the center and mirror it
command : DO ( For donut )
internal diameter :0
outer diameter :2
press enter
command : L (for line )
and draw the links of columns - RESULTS :
COMMAND USED :
TEXT : DT
TEXT STYLE : D
TRIAM : TR
EXPLODE: X
CIRCLE : C
RECTANGLE : REC
DONUT : DO
AIM :
2. Create a window schedule as shown in the figures:
SOFTWARE USED : AUTODESK AUTOCAD 2021
PROCEDURE :
first the open the software
give the command QNEW and press the ENTERE key
click on imperical templete
select ADVANCE SETUP
unit : Engineering, precision :0.00
angle :decimal degree , precision :0.00
angle measure : East
angle direction : closkwise
area : 20*20
and finished , lets start
command : D (dimension style manager )
click on :MODIFY
select : TEXT option
selct text style : romanc.shx
command : dt (for text )
select start point
height : 8"
angle :0
justify : left
press : ENTER
prepare a table and write all texts in table
go to the layer properties
create two layers
for table
table : cyan
text colour : yellow - RESULTS :
AIM :
3. Create the drawing template as shown in the figure:< Use the Notes as in the figure>
SOFTWARE USED : AUTODESK AUTOCAD 2021
PROCEDURE :
first the open the software
give the command QNEW and press the ENTERE key
click on imperical templete
select ADVANCE SETUP
unit : Engineering, precision :0.00
angle :decimal degree , precision :0.00
angle measure : East
angle direction : closkwise
area : 20*20
and finished , lets start
command : D (dimension style manager )
click on :MODIFY
select : TEXT option
selct text style : romanc.shx
command : dt (for text )
select start point
height : 8"
angle :0
justify : left
press : ENTER
prepare a table and write the texts
RESULTS :
COMMAND USED
TEXT : DT
TRIAM : TR
DIMENSION MANNAGER :D
AIM :
4. Create the list of drawing schedule as shown in the figure:
SOFTWARE USED : AUTODESK AUTOCAD 2021
PROCEDURE :
first the open the software
give the command QNEW and press the ENTERE key
click on imperical templete
select ADVANCE SETUP
unit : Engineering, precision :0.00
angle :decimal degree , precision :0.00
angle measure : East
angle direction : closkwise
area : 20*20
and finished , lets start
command : D (dimension style manager )
click on :MODIFY
select : TEXT option
selct text style : romanc.shx
command : dt (for text )
select start point
height : 8"
angle :0
justify : left
press : ENTER
prepare table and write the text
RESULTS :
COMMAND USED
START : QNEW
TEXT : DT
TREAM : TR
DIMENSION MANNAGER : D
LINE : L
AIM :
5. Create the Beam detail as shown in the figure and provide text wherever given.
SOFTWARE USED : AUTODESK AUTOCAD 2021
PROCEDURE :
first the open the software
give the command QNEW and press the ENTERE key
click on imperical templete
select ADVANCE SETUP
unit : Engineering, precision :0.00
angle :decimal degree , precision :0.00
angle measure : East
angle direction : closkwise
area : 20*20
and finished , lets start
command : D (dimension style manager )
click on :MODIFY
select : TEXT option
selct text style : romanc.shx
command : dt (for text )
select start point
height : 8"
angle :0
justify : left
press : ENTER
Command : L ( for line )
select a starting point
and draw the column section
command : hatch
select the line and give the hatch
command : dt ( for line )
give the all text
crete layer
text colour : yellow
column : cyan
RESULTS :
COMMAND USED :
START : QNEW
LINE : L
TEXT : DT
HATCH : HATCH
TRIAM : TR