Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

ASSIGNMENT 9

1.Create the templates as shown in figures. For creating title block you need to save it as a block with names – custom 1 title block and custom 2 title block.

Ans –

step 1 -

The little block is a template created in a sheet which contains the information or data regarding the drawing and also the information of the company and persons of the company responsible for the

The given title blocks custom1 and custam2, one with vertical title block at the right and another bottom of the

The little block contains information regarding the revision number of the drawings, title of the drawings, names of the parsons involved in making of the

Open AutoCAD

Type ”un” in command box and press enter

Change units” type to decimal and precision to 00 and insertion scale to millimeters Change ”limits’ to (op) and (5000,5000)

Type -LA- in the command box and press

Open layer properties and create new

Step 2 :- Creating custom1 titleblock

• Change current layerto
• Type ”rec" in the command box an d press
• Draw a rectangle of dimensions 440mm length and
• Type ”explode” in the command box an d press
• Select the rectangle drawn and explode the
• Type ”0” for offset command and press
• Specify offset distance as
• Select the upper edge of the rectangle and click at
• Type ”0” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type ”0” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type ”0” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type ”0” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type ”0” for offset command and press
• Specify offset distance as

• Select the last offseted line and click at
• Type “o” for offset command and press
• Select offset distance as
• Select the last offseted line and click at
• Type “o” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at bottom
• Type “o” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type “o” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type “o” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Use the offset command and draw the vertical columns as the same as
• Type "tr”' in the command box and Press
• Trim the extra object in the

Step 3 :- Adding texts to custom1 titleblock

• Change layer to "Text™.
• Go to the "Annotation" bar and click on multi Set the height of the text and text style.
• Select the area and type the text as given in the
• Now select the text and copy that text to the other places where the text

Type "ed’ for edit text as per the question.

Step 4 – convert the custom1 title block in block.

Type b in command box and press enter

Select the pick point

Select the whole title table as an object to be block.

Set the other detail as per requirement.

Click on OK.

Step 5 - Creating custom2 titleblock.

• Change current layerto
• Type ”rec" in the command box an d press
• Draw a rectangle of dimensions 400mm length and
• Type ”explode” in the command box an d press
• Select the rectangle drawn and explode the
• Type ”0” for offset command and press
• Specify offset distance as
• Select the upper edge of the rectangle an d click at
• Type ”0” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type ”0” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type ”0” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type ”0” for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type ”0” for offset command and press
• Specify offset distance as

• Select the right edge of rectangle line and click on left
• Type -O" for offset command and press
• Specify offset distance of
• Select the last offseted line and click at
• Type -O" for offset command and press
• Specify offset distance of
• Select the last offseted line and click at
• Type -O" for offset command and press
• Specify offset distance as
• Select the last offseted line and click at
• Type -O" for offset command and press
• Specify offset distance as
• select the last offseted line and click at
• Type -O" for offset command and press
• specify offset distance as
• Select the last offseted line and click at
• Type “tr” in the command box and press
• Trim the extra lines in the table and make the table as per the

Adding texts to custom2 titleblock

• Change layer to "Text™.
• Go to the "Annotation" bar and click on multi Set the height of the text and text style.
• Select the area and type the text as given in the
• Now select the text and copy that text to the other places where the text

Type "ed’ for edit text as per the question.

convert the custom2 title block in block.

Type b in command box and press enter

Select the pick point

Select the whole title table as an object to be block.

Set the other detail as per requirement.

Click on OK.

2.create the doors type for ware house as shown in the question and create the blocks of each door using AutoCAD.

• Open AutoCAD
• Type ”un' in command box and press enter
• Change units” type to decimal and precision to 00 and insertion scale to millimeters Change limits' to (0,0) And (5000,5000)

Creating Layers

• Type -LA- in the command box and press
• Open layer properties and create new layers by clicking on new layer The layers created are as follows :—

Creating DOOR 1

• Change current layer to Door.
• Type ”rec" in the command box and press
• Draw a rectangle of dimensions 2330mm length and 2750mm width.
• Type ”explode" in tic command box and press
• Select the rectangle and draw it.
• Type 'O" for offset command and press
• Specify offset distance as 230mm.
• Select all the edges of rectangle except left ' width and c lick inside the
• Type ”O" for offset command and press
• specify offset d istance as
• Select the left width of the rectangle and click inside the
• Type ”TR" in the command box and Press
• Trim the extra lines.

Make the inside frame design by Typing ”rec" in the command box and press enter.

• Give dimension as 340 length and 640 width.
• Type 'O" for offset and press
• Give offset distance as 20 and press
• Select the rectangle and press
• Type ’O" for offset and press
• Give offset distance as 70 and press
• Select the rectangle and press
• Select the design and type "CO’ and make the pattern as shown in question.
• Change current layer to
• Type -rec" in the command box and press
• Draw a rectangle of dimensions 233Omm length and 275Omm
• Type -explode- in the command box and press
• Select the rectangle drawn and explode the
• Type -O" for offset command and press
• Specify offset distance as
• Select all the edges of the rectangle except left width and click inward the
• Type -0" for offset command and press
• Specify offset distance as
• Select the left width of the rectangle and click inward the
• Type IR- in the command box and press enter.
• Trim the extra

Make the inside frame design by Typing -rec" in the command box and press enter.

• Type -O" for offset command and press
• Specify offset distance as

Select all the left width of the rectangle and click inward the rectangle.

• Type -O" for offset command and press
• Specify offset distance as

Select the last offset line and click on right.

• Type -O" for offset command and press
• Specify offset distance as

Select the last offset line and click on right..

• Type -O" for offset command and press
• Specify offset distance as

Select the last offset line and click on right.

• Select the last offset line and click on right. Type -O" for offset command and press
• Specify offset distance as
• Select the last offset line and click on .
• Type -O" for offset command and press
• Specify offset distance as
• Select the last offset line and click on
• Type OR- in the command box and press

Type -O" for offset and press enter.

• Then make the door knob as per question. After completion the door knob and final door look as follow:-

convert the warehouse door into block.

Type b in command box and press enter

Select the pick point

Select the whole title table as an object to be block.

Set the other detail as per requirement.

Click on OK.

3.create each symbol as a block with the name given in the legend and arrange them in the legend as blocks using AutoCAD.

Procedure:-

• Open AutoCAD
• Type 'un” in command box and press enter
• Change units’ type to decimal and precision to 00 and insertion scale to millimeter change ’limits' to (0,0) and (5000,5000)

Creating Layers

• Type "LA" in the command box and press
• Open layer properties and create new layers by clicking on new layer

Creation of symbols –

Use the command of line, circle, rectangle and create the designs as per given in questions.

Place all the designs in the respective boxes with proper sequence.

Adding texts to table

• Change layer to "Text”.
• Go to the "An notation” and click on multi Set the height of the text and text style.

Select the area and type the text as given in the question.

• Now select the typed text and copy that text to the other places where the text
• Type "ed’ for edit text and select the text and change the different text as per the

convert the symbol legend table in block.

Type b in command box and press enter

Select the pick point

Select the whole title table as an object to be block.

Set the other detail as per requirement.

Click on OK.

4.create the door type for residential building as a block and save the name of the blocks using AutoCAD.

Procedure :-

• Open AutoCAD
• Type ’un in command box and press enter

Chan g e units’ type to decimal and precision to 0.00 and insertion scale to millimeters C hange ’limits’ to (0,0} and (5000,5000)

A) DOOR 1

Creating Layers

Type "LA" in the command box and press enter.

• Open layer properties and create new Iayers by clicking on new layer

Creating Door_1

• Change current layer to
• Type "rec" in the command box and press
• Draw a rectangle of dimensions 2'- 10" length and 6’ - 11"
• Type "explode" in the command box and press
• Select the rectangle drawn and explode the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick inward the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick in award the
• Type "tr” in the command box and press
• Trim the extra

Adding dimension to Door 1

• Change layer to "dimension”.
• Go to the "Annotate" for and click on Dim linear.
• Set the dimension property by Typing "D" and press
• Give dimension as per the

B) DOOR 2

• Change current layer to
• Type "rec" in the command box and press
• Draw a rectangle of dimensions 3’4” length and 6’ - 11"
• Type "explode" in the command box and press
• Select the rectangle drawn and explode the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick inward the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick in award the
• Type "tr” in the command box and press
• Trim the extra
• For creation of internal structure, specify the total distance of length and width and divide them as per the required squares by proper dimensions.

C )DOOR 3

• Change current layer to
• Type "rec" in the command box and press
• Draw a rectangle of dimensions 2’9”length and 6’ - 11"
• Type "explode" in the command box and press
• Select the rectangle drawn and explode the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick inward the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick in award the
• Type "tr” in the command box and press
• Trim the extra
• Type h for hatch command and give proper hatching in middle square.

1. D) DOOR 4

• Change current layer to
• Type "rec" in the command box and press
• Draw a rectangle of dimensions3’4”length and 6’ - 11"
• Type "explode" in the command box and press
• Select the rectangle drawn and explode the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick inward the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick in award the
• Type "tr” in the command box and press
• Trim the extra
• Use ellipse command from home tab and draw all the ellipse from the centre point of the middle square.
• Again use trim command and trim unnecessary part.

1. E) DOOR 5

• Change current layer to
• Type "rec" in the command box and press
• Draw a rectangle of dimensions3’4”length and 6’ - 11"
• Type "explode" in the command box and press
• Select the rectangle drawn and explode the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick inward the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick in award the
• Type "tr” in the command box and press
• Trim the extra

1. F) DOOR 6

• Change current layer to
• Type "rec" in the command box and press
• Draw a rectangle of dimensions3’4”length and 6’ - 11"
• Type "explode" in the command box and press
• Select the rectangle drawn and explode the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick inward the
• Type "O" for offset command and press
• Specify offset distance as 0".
• Select all the edges of the rectangle and c lick in award the
• Type "tr” in the command box and press
• Trim the extra

5.create each shape as a block as shown in the question and save them as block and insert them on the table as shown in the question using AutoCAD.

• Open AutoCAD
• Type 'un” in command box and press enter
• Change units' type to decimal and precision to 00 and insertion scale to millimeters Change 'limits’ to (0,0) and (5000,5000)

• Type ”LA” in the command box and press
• Open layer properties and create new layers by clicking on new layer

Step 2 – creation of different bar bending schedules

Take l command and draw line of 750mm length and draw curve using the 2 point circle command from the both side points.

Extend both curvy part inside the drawing by 18mm.

Take line command and draw a line of 390mm and extend line by both the end points in vertical direction at an angle of 45 degree.

Draw a line from right side and left side at a distance of 139mm and by circle command draw a curvy part from both the side in downward direction.

Take line command and draw a line of 210mm and extend line by both the end points in vertical direction at an angle of 45 degree.

Draw a line from right side and left side at a distance of 180mm and 160mm respectively and by circle command draw a curvy part from both the side in downward direction.

Draw a line of 750mm and draw a curvy part in downward direction from both end and extend the both points at a distance of 11mm inside the direction.

Take rectangle command and draw a rectangle of 43mm height and 23mm length.

Take fillet command and draw curve with radius 5 from 4 end points.

Draw 2 lines of 12mm from the corner point of rectangle.

Adding texts to table

• Change layer to "Text”.
• Go to the "An notation” and click on multi Set the height of the text and text style.

Select the area and type the text as given in the question.

• Now select the typed text and copy that text to the other places where the text
• Type "ed’ for edit text and select the text and change the different text as per the

convert the table in block.

Type b in command box and press enter

Select the pick point

Select the whole title table as an object to be block.

Set the other detail as per requirement.

Click on OK.