Tension & Torsion Test on Specimen using ANSYS Workbench
- Tension Test
Objective: To perform the tension test on the work piece
Geometry :
The Geometry is been imported to the design module
Material
Steel 1006 is been used for the work piece
Coordinate System
Two Coordinate system is been created on the model for mesh refinement
Mesh
Face mesh is done the body of work piece with the reference of their corresponding Coordinate system
Type:Sphere of influence
Radius of sphere :22mm
Element size :2mm
Analyisis Setting
End Time:0.0003s
Number of Step:1
Boundary Condition
- Fixed Joint
One side of the work piece been fixed
- Displacement
Displacement is given to the other side of the work piece 18mm
Post Processing
- Equivalent von Misies Stress
- Equivalent Elastic Strain
- Total Deformation
- User Define Temperature
Solution Output
Equivalent von Misies Stress(636.69MPa)
Equivalent Elastic Strain(0.0030377)
Total Deformation(18.003mm)
Temperature (249.78)
- Torsion Test
Objective: To perform the torsion test on the work piece
Geometry , Materials and Analyisis Setting are the same
Coordinate System
Three Coordinate system is been created on the model for mesh refinement
The middle Coordinate System is cylinder type with z axis principal axis for rotation displacement along y axis
Mesh
- Face mesh is done the body of work piece with the reference of their corresponding Coordinate system
Type: Sphere of influence
Radius of sphere :22mm
Element size :2mm
- Second face mesh is done on the middle face of the work piece with the reference of Global Coordinate system
Type: Sphere of influence
Radius of sphere :8mm
Element size :1mm
Boundary Condition
- Fixed Joint
One side of the work piece been fixed
- Displacement
The Displacement given to other side of work piece with reference of the middle coordinate system since its cylinder type the displacement type will rotation in degree 1200degree
Post Processing
- Equivalent von Misies Stress
- Equivalent Elastic Strain
- Total Deformation
- User Define Temperature
Solution Output
Equivalent von Misies Stress(555.97MPa)
Equivalent Elastic Strain(0.0031839)
Total Deformation(19.297mm)
Temperature (459.04)
Results
|
Test |
Equivalent Stress
|
Equivalent Elastic Strain
|
Total Deformation
|
Temperature |
|
Tension Test
|
636.69MPa |
0.0030377 |
18.003mm |
249.78 |
|
Torsion Test
|
555.97MPa |
0.0031839 |
19.297mm |
459.04 |
The Two test is been simulated on the work piece and corresponding results is also been taken out.