ODD ENCLOSURE
ODD ENCLOSURE
OBJECTIVE:
To observe the model and design the sheet metal by using given dimensions and instructions
INTRODUCTION:
NX is widely used Computer Aided Designing software for multi purposes like designing, engineering and manufacturing. It used in various fields for different works. Using different features and methods we have designed here.
DESIGN METHODOLOGY:
DESCRIPTION:
- Sketching - Making a 2d drawing such as curves, arcs, cirlces, points, rectangles and many options to create a drawing or to create features for upcoming designing.
- Extrude - It is to make the 2d sketch in a 3 dimensional body or object by defiining its thickness.
- Sheet metal from solid - It converts the solid shaped part to shaped sheet metal, and is available in only sheet metal application.
- Flange - it adds an angular or flat surface on the edge of the surface to create an extended surface with the required directions,
- Jog - It modifies the sketch by lifing on the one side and adds flange of required length between the two end sides.
- Unbend - It is to flatten the bend sheet metal to form a flat sheet. It helps in making a extra features like bead, normal cutout on the sheet metal after bending.
- Bead - This is to create a contour shaped accordingly to their sketch in the required direction with required punch/die radius,
- Hole - It is to create a hole on sketch, or to create a counter bored, counter sink and several hole options to do.
- Bead - It is to create a contour or projection on the sheet, as respected with the created sketch.
- Flat pattern - It creates the flat pattern of the sheet metal in a seperate sheet for it dimensions and details of the model.
SCREENSHOTS:
ISOMETRIC VIEW:
TOP VIEW:
FRONT VIEW:
RIGHT VIEW:
TRIMETRIC VIEW:
DRAWING SHEET:
CONCLUSION:
The model has been designed and dimensioned as given in the instructions with proper constraints.