AMERICAN CHOPPER
AIM:
To Design American Chopper And American chopper realsitic rendering using soild works
TOOLS USED:
1. Soild Works 2019
2. soild works visualize 2019
INTRODUCTION:
SOILD works is a soild modeling aided design . To create 2d and 3d model and photo realistic rendering
STEPS OF DESIGN TO CREATE SOLID BODY:
1.Select plane
2.Define the sketch with fully defined
3.Extrude , revolve,surface and 3d sketch
4.Fillet or chamfer to make sharp edges
5.analysis
MODELLING SPERATE PARTS OF AMERICAN CHOPPER:
1. Transmission belt
2. Front fender
3. Rear fender
4. Gas tank
5. oil tank
6. side stand
7. pedal
8. engine
9. chassis
10. front wheel
11. rear wheel
COMMANDS TO CREATE SOLID BODY:
Sketch:- Sketch is used to create 2d sketch into 3d model.Sketch is based on different type sketches spline, line, circle.
Boss extrude:- To make the sketch as per the dimension with fully defined sketch and convert into solid body component.
Cut extrude:- Helps to remove the required part from the solid body.
Revolved boss:- These commands are used to crate shaft like object. Draw the centerline with axis of revolution as per dimension. For example - FORK
Convert entities:- It is used to create one more sketch like line curve face.
Merge or combine:-it used to make two parts into single part.
Mirror:-make a copy of created solid body through selecting the plane.
Projected curve:- draw the two different curve and make desired curve selecting the option of projective curve
3D SKETCH:-
We can draw a line , spline without any plane.
COMPONENTS MODELLED
Transmission belt:Transmission belt is used to connect from one pulley to another and generate the power to run the motor. It has been made in rubber type.
cad image: render image:
Kick stand: kick stand is made in steel use to park the motor cycle.
cad image render image
Front and rear fender: Both this fender use to avoid harden material from the surface to protect the tire and driver .such as stone, mud and rainy season.
cad image
render image
Oil tank: To store the engine oil for lubrication and the engine should be in normal temperature and make smoothy condition of engine.
cad image render image
Pedal: This type of model use to apply brakes using foot rest.
cad image render image
Chain:A motor cycle chain is a roller chain it connected from engine to back wheel of driver it generate power to run the bike fast and faster. Chain are more strong and highly strength material.
cad image render image
Rear wheel: Major component to move the vechile and generate power from the engine. It contains RIM, ROTOR, CHAIN SPARKET , CALLIPER.
Rotor and caliper in wheel used for braking
Chain sprocket which receive the power from engine through chain link to move the motor cycle.
cad image render image
Front wheel: It consists with RIM , ROTOR AND CALIPER.
Rotor and caliper used for braking system.
Front wheel connected with front fork.
front wheel render image
Front fork: Front fork consists with HANDLE, HANDLE BRAKES, HEAD LIGHT, CLUTCH LEVER, SUSPENSION.
cad image render image
Engine: Engine is the major part of motor cycle which generate power .it has sperated into two types . Two stroke and Four stroke engine.
render image cad image
Chassis: chassis is major part component for any automobile. It is made from welded aluminium struts. Chassis which holds the components wheel , engine, front fork , pedal etc..
cad image render image
Assembly model:
CAD MODEL:
RENDER MODEL:
Project Link:https://drive.google.com/open?id=19Lm_h5XsX2XFSNopiTNbXyJatOJLURRb