Q1.Ans= For creating the model i use the solenoid coil because solenoid coil is work as the switching purpose when we give the supply to both the positive and negative terminal the coil get energized and create the magnetic field. in this coil i give the supply to that from battery source and also the common reference…

Q1 While implementing the washing machine logic i use the stateflow. In this i use the power supply and water Supply as the input. As i use the logic 1st i give the input supply to machine if it is on then it goes to 2nd condition for cheaking the water if water is high that is 1 then it is go for soak condition if it…

Q1. For CVT model the following blocks are used as follow  1) Signal Builder 2) Generic Engine 3) Signal Builder For CVT signal 4) Engine Sensor 5) Simple Gear 6) Vehicle Body Explanation:- For thr run this model we have to you all different type of component and parameter to get an desire output. We use signal builder…

Project.c= #include"list.h"//header// int main()//main function// { int first_list_nodes=0,second_list_nodes=0,first_list_items=0,//local variable// // second_list_items=0;//variable declaration// printf("\nEnter the number of nodes in first list:");//displayed the massage to  the user to enter the first list// fflush(stdout);//cleared…

Ans:-  In this project we have to implement the concept of the safely landing and take off of operation of the plane in that taken care of the safety precaution and accurate operation of the respective gear and lever positions and light status as well.   The goal is using the condition which is menstion…

Code #include<avr/io.h> #define F_CPU 16000000ul #include "avr/interrupt.h" #include <util/delay.h> #define sw_dir (PIND&(1<<1)) #define sw_spd (PIND&(1<<2)) #define pw (PINC&(1<<3)) #define lcd_port PORTB #define RS_high PORTD|=(1<<5) #define RS_low PORTD|=(1<<5) #define…

#include <avr/io.h>#define F_CPU 16000000#include <util/delay.h>#define TRIG PB1#define ECHO PB0unsigned int pulse_width,TimerOverflow;int main(void){ float distance = 0; DDRB |= (1<<DDB1); //Configure the trig pin as output while(1) //Infinite loop { trigger(); init_timer(); distance = (34*pulse_width)/2;…