Full course · free on YouTube · 46 min

Automotive lighting design webinar, part 2: free, 46 minutes

This is a November 2021 recording of a live Skill-Lync workshop, 46 minutes long, and the second session of a two-part webinar. It opens with a recap of part 1, then works through materials, lighting regulations, headlamp and tail-lamp sections, testing and validation, and new lighting trends, mostly with slides and regulation documents.

25 chapters · published 25 Nov 2021 · 7,924 views as of 19 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and design engineering students and early-career engineers who want to understand how automotive headlamps and tail lamps are built, regulated and tested.

What will you learn?

  • Name the plastics used for lamp lenses, reflectors and housings, and why PC and PMMA suit different parts
  • Explain what R148, R149 and R150 cover and why they replaced the per-function regulations
  • Read the indicator category scheme in R148 and where the homologation number is marked
  • Identify the main parts in a headlamp and a bulb-type tail lamp, including the aiming adjustment
  • List the nine tests a lamp designer should keep in mind, from gap and flush to homologation
  • Describe laser, adaptive front lighting and OLED tail-lamp trends

What does each part of the course cover?

8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:007 min · 3 chapters

    Agenda and recap of part 1

    Opens as the second session of a two-part webinar and lists the agenda: materials, new regulations, headlamp and tail-lamp sections, testing and validation, and trends. Recaps part 1: head, tail and indicator lamps, adaptive front lighting, CATIA V5 as the main engineering software, and the supplier workflow from RFQ to production.

    Chapters
    • 0:00Agenda for part 2 of the webinar
    • 1:41Part 1 recap: lamp types, adaptive lighting and software
    • 3:50Part 1 recap: jobs, design workflow and suppliers
  2. 6:494 min · 3 chapters

    Plastics used in automotive lamps

    Lists the materials used in lamps (PC, PMMA, BMC, PET, PBT, PP with talc or mineral filler, and milky or diffused material) and explains how the choice depends on the part. Covers PC for headlamp outer lenses, PMMA for tail lamps, reflectors, PP housings and diffuse materials for an even light output.

    Chapters
    • 6:49Plastics used in lamps and how to choose them
    • 8:44Housing materials: polypropylene with filler
    • 9:19Milky and diffuse materials for even light output
  3. 10:4413 min · 5 chapters

    Lighting regulations: R148, R149 and R150

    Explains why lamps need homologation approval and how the older per-function regulations were replaced by three combined ones. R148 covers light-signalling devices, R149 road-illumination devices such as headlamps and R150 retro-reflective devices and markings. Walks through the R148 document: front direction indicator categories and minimum intensities, and the marking and certification number.

    Chapters
    • 10:44Why lamps need regulatory approval
    • 12:47R148, R149 and R150 replace the per-function regulations
    • 15:29Why the regulations were combined
    • 17:05Reading R148: indicator categories and intensities
    • 21:15R150 (retro-reflective devices and markings) and R149 headlamp scope
  4. 23:316 min · 3 chapters

    Headlamp section and parts

    Takes a headlamp model with turn indicator, high beam, low beam and position bulbs. Explains the aiming adjustment, how thermal simulation guides the reflector material choice, standard bulbs from suppliers, nylon for the pivot part, and the many small parts such as dust cap, aiming bolt and vent cap.

    Chapters
    • 23:31Headlamp functions, bulbs and aiming
    • 25:47Headlamp materials and thermal checks
    • 27:20Standard bulbs, pivot part and other small parts
  5. 29:103 min · 1 chapter

    Tail-lamp section and parts

    Goes through a bulb-type tail lamp: a dual-function bulb for tail and stop, a position bulb and a yellow bulb for turn indication. Names the housing and lens materials, the small number of extra parts, the desiccant bag, and the heat shade used when material choice is limited.

    Chapters
    • 29:10Tail-lamp section, bulbs and materials
  6. 32:066 min · 4 chapters

    Testing and validation, part 1: gap and flush, leakage, thermal, photometry

    Introduces the nine testing points a designer should keep in mind. Covers gap and flush with tolerance stack-up and mould-flow warpage checks, air-pressure leakage testing after lens and housing joining, thermal checks at design stage, and photometry against the regulation.

    Chapters
    • 32:06The nine tests a designer should know
    • 32:57Gap and flush, tolerance stack-up and warpage
    • 35:19Leakage testing
    • 36:43Thermal and photometry checks
  7. 38:355 min · 3 chapters

    Testing and validation, part 2: vibration to homologation

    Continues the list with vibration (including an Ansys simulation mention), electric current and EMI/EMC for electronic circuits, condensation and fogging, material testing, and homologation, where the certification number is printed on the lamp. The speaker notes there are more than 25 tests in total.

    Chapters
    • 38:35Vibration, electric current and EMI/EMC
    • 40:48Condensation and fogging
    • 41:52Material testing and homologation
  8. 43:423 min · 3 chapters

    New trends: laser, adaptive and OLED lighting

    Covers laser headlamps introduced on BMW models, the adaptive front lighting system that turns with the road and reduces glare on other vehicles, and OLED tail lamps following the move from bulbs to milky or diffuse lenses. The speaker gives their view that adoption in India will take time.

    Chapters

Is the Automotive Lighting Design: Part 2 (Materials, Regulations, Testing and Trends) course really free?

Yes. All 46 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 25 Nov 2021 and had 7,924 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Automotive Lighting Design: Part 2 (Materials, Regulations, Testing and Trends) course take to finish?

The video runs 46 min across 25 chapters. At one hour a day that is about 1 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Lighting regulations: R148, R149 and R150" (13 min), so give it its own days.

Does the free automotive lighting course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Automotive Lighting Design using CATIA V5 (free lessons), then Automotive Lighting Design using CATIA V5 (₹40,000), then Post Graduate Program in Automotive Design using CATIA V5 (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Do I need to watch part 1 of the automotive lighting webinar first?

Not strictly. This is the second session of a two-part webinar, and it opens with a recap of part 1: lamp types, the software used, the design workflow and job routes. The speaker says part 1 is also on YouTube; this page covers part 2, and its recap is enough to follow it.

Does this webinar show CATIA V5 hands-on?

No. Despite the title, this second session is mostly slides and regulation documents. CATIA appears only in the part 1 recap, where the speaker says CATIA V5 is mainly used for the engineering work and V6 is being introduced. There is no modelling demo.

Which lighting regulations does the webinar explain?

The speaker explains that per-function regulations were replaced by three combined ones: R148 for light-signalling devices, R149 for headlamps and other road-illumination devices and R150 for retro-reflective devices and markings (all UN regulations). R148 is opened on screen to show indicator categories and the marking scheme. The agency's documents are described as free to download.

Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Automotive Lighting Design: Part 2 (Materials, Regulations, Testing and Trends) and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Automotive Lighting Design: Part 2 (Materials, Regulations, Testing and Trends) course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.