Project 1 - V&V SW Analysis - I

Faced lot of difficulties loading particular files in LDRA and as per mentors advice used the available file to do the test( not used the mentioned file in the projrct) and got the possible screenshots

Test Plan to test features of a new mobile phone    US-1: When power button of the phone is long pressed                   Phone switch on                             …

#define F_CPU 16000000UL #include <avr/io.h> #include <avr/interrupt.h> #include <util/delay.h> #include <string.h> #include <stdlib.h>   #define LCD_Data DDRD // Define LCD data port direction #define LCD_Comm DDRC // Define LCD command port direction register  #define LCD_Data_Port…

#include <avr/io.h> #define F_CPU 8000000L #include <avr/interrupt.h> #include <util/delay.h> unsigned int n,duty;   #define rs_high() PORTA |=(1<<2); #define rs_low() PORTA &= ~(1<<2);   #define en_high() PORTA |= (1<<3); #define en_low() PORTA &= ~(1<<3);  …

#include   using namespace std; int in=0; class Vehicle { protected: string make,model,veh_type; int year; long int odometer;   public: Vehicle(string _make = "", string _model="",int _year=0, int _odo=0) { make = _make; model = _model; year = _year; odometer = _odo; } string getType() {   return veh_type; } string getMake()…

onst int digPin = 6; long dist,cm; int index = 0;   int value = 0;   int sum = 0;   int read[5];   int average = 0;   int buff=0; void setup() {     Serial.begin(9600); }   void loop() {   int n;         pinMode(digPin, OUTPUT);   digitalWrite(digPin, LOW);   delay(200);   digitalWrite(digPin, HIGH);   delay(200);   digitalWrite(digPin,…

// Master Arduino #include  #include  LiquidCrystal lcd(12, 11, 5, 4, 3, 2); //Define LCD Module Pins (RS,EN,D4,D5,D6,D7) void setup() { lcd.begin(16,2); //Initilize LCD display lcd.setCursor(0,0);  lcd.print("I2C MASTER ARDUINO");  delay(5000); //Delay for 5 seconds lcd.clear(); //Clears LCD display Serial.begin(9600); …

#include<stdio.h> #include"datas.h"   // Function for Initiate the Process   void Initiate_State_Machine() { current_state=GEAR_DOWN; printf("The FSM program for Flight Landing gear is Initialized and currently the program in  light is : %s\n",State_Machine[current_state].current_state_indication);…

#include <stdio.h>#include <stdlib.h>#include <malloc.h>struct node{ int data; struct node* next;}; struct node*createlist(int n){ struct node *head=0,*newnode,*temp; int x,i; for(i=0;i<n;i++) { printf("\nEnter the data: "); fflush(stdout); scanf("%d",&x); newnode=(struct node*) malloc(sizeof(struct…

clc;clear; dt=xlsread('D:\EV design\chall3\VI.xlsx'); %Saving the data from excel to a variable "dt"V=dt(:,1);I=dt(:,2); iv=-17.3:0.1:0.9; % Setting interpolation range ipl=interp1(V,I,iv); %Linear Interpolation (Default) figure(1)plot(V,I,'o',iv,ipl,'*');title('Linear Interpolation');file1 = fopen('linear_interpolation.txt','w');fprintf(file1,'%6s…