Mohit
Mohit Dubey

Design and Production Planning Engineer

ANSYS-WORKBENCH, ANSYS-MESHING

About

Dy. engineer @ HMT machine Tools Limited (A Government of India undertaking).

Projects

Long piston and Cam

Analysis Setting: Case 1:  Frictionless contact  Equivalent Stress: Directional Deformation Equivalent Elastic Strain: Case 2:  Frictional contact with 0.1 coefficient  Equivalent Stress: Directional Deformation Equivalent Elastic Strain: Case 3:  Frictional contact with 0.2 coefficient  Equivalent…

Tension and Torsion Test

Analysis setting:   Mesh setting:   mateial of workpiece: Case 1: Tension Test Displacement: fixed support: Cordinate system: Total deformation: Eq. stress: Eq. strain: Temperature:   Case 2: Torsion test Displacement: fixed support: Cordinate system: Total deformation: Eq. stress: Eq. strain: Temperature:…

wire bending

Case 1: Wire material copper alloy NL Equivalent stress on the wire    Equivalent strain on the wire    Case 2 Wire material alluminium alloy NL Equivalent stress on the wire    Equivalent strain on the wire    Case 3: Wire material Magnesium alloy NL Equivalent stress on the wire …

ANSYS Analysis of Spur Gear

ANSYS analysis of Spur Gear  Analysis has been done using ANSYS Acadmic version using different material with following analysis setting. Analysis setting: The number of steps taken as 6. Large Deflection- on Time step: Initial time step-0.2 s min. time step-5e-002 s max time step-0.5 s Type of contact- frictional…

Universal Joint

Analysis setting:     Mesh 4 mm:     joints:   Rotation:   Case 1: material : structural steel   Eq stress: Total Deformation: Case 2: material : stainless steel   Eq stress:   Total Deformation: Case 3: material : Titanium alloy   Eq stress:   Total Deformation:  …

Bullet penetration test

Analysis setting: Mesh: Bullet material: Velocity: Properties of used materials: Aluminium NL: Cu NL: Stainless steel NL:   Tantalum :   Case 1:  Aluminium NL as bucket material Total Def: Eq. Strain: Eq stress: Case 2: Copper NL as bucket material Total Def: Eq. Strain: Eq stress: Case 3: Stainless…

Worm Gear challange

Worm and gear after cut :   Analysis setting:   Frictionless contact:   Mesh : 4 mm Rotation:   Total Deformation:   Eq Elastic Strain:   Eq Stress: The above is worm gear analysis. worm gear is used where high reduction ratio is needed. Generally worm is made up of steel and wheel made up…

Car Crash Simulation

Analysis setting: symmetry: displacement: Fixed support: car body material: Material properties: Total deflection: Eq strain: Eq stress: Parametric study: For thickness 0.3,0.4,0.5 mm:   Conclusion: As the thickness increases the stress,strain and total deformation decreases. As thickness increases the strength…

Planner machining

Analysis setting: cutting tool material: Structural steel (rigid behaviour) workpiece material: Steel 1006 Case 1: cutting velocity- 20000 mm/s   Eq stress: Total deformation: Temperature of w/p:   Case 2: cutting velocity- 15000 mm/s   Eq stress: Total deformation: Temperature of w/p: Conclusion: The temperature…

Gride dependency test on Bevel Gear

1. Grid Dependency Test- This test determine the optimum mesh size for the accurate results keeping the computational time also in mind. Finner the mesh the result will be more accurate.So, we have to choose the mesh size which provide us closer result in less time. 2.Grid Dependency Test on bevel gear for mesh size 4,…

Structural Analysis of Railwheel and Track

Analysis Setting:      Case-1: Total Deformation for 100000 N Bearing load Total Deformation for 500000 N Bearing load   Equivalent stress for 100000 N Bearing load Equivalent stress for 500000 N Bearing load   Life under 100000 N Bearing load   Life under 500000 N Bearing load   Case-…

Sphere pressing on Plate

Material: For sphere: Structural steel For Plate : Structural steel NL Press the sphere onto plate 4mm downwards and retract it Directional Deformation: Eq stress on plate: Eq. strain on plate: Eq. strain on sphere:  

Rolling of copper workpiece

Analysis setting Material properties: Copper;   Model Geometry:   Analysis setting Connection 1: Connection 2: Mesh: 1. Equivalent stress 2. Equivalent Plastic strain for the workpiece 3. Directional Deformation in the Z axis for the workpiece 4. Prove that the workpiece has displaced by 90mm  

Verification of weld joints

Analysis setting: Mesh sizing: Force: 15000 N Case 1 :Stainless Steel: In this case, the material of the plates must also be the same. Use Stainless steel for both weldments and plates. No need to add flux to the weldments. Material: Stainless steel Directional Deformation equivalent stress: equivalent strain: Weld joint…

Plate with a Hole

Stress concentration on plate with a hole Case:1 For case 1 structural analysis carried out on plate with a hole of diameter 60 mm. The ,material is used is structural steel. The plate is modelled in Ansys spaceclaim software and is shown as below: The dimension of plate are: Lenght=300 mm Width=120 mm Thickness = 30 mm…

Week 5 Bending of iPhone

                                                             Bending of iPhone Objective: To simulate the bending of iPhone     Analysis setting: …

Course Certificates

Introduction to Structural Analysis using ANSYS Workbench

Completion Certificate UID : cap073ygwsjenb16