Menu
All Courses
All Courses
Meshing the Plastic Component of a Car Side Door Model using Hypermesh
In this project you will be provided with Plastic component of the Car side door model, where you have to extract the Mid- Surface manually, followed by performing 2D mesh as per the Quality parameters mentioned.
- Mechanical
- Production
- FEA
- Automotive
- Manufacturing
1 month
INR 30,000
Benefits of this Project
In this project you will be provided with Plastic component of the Car side door model, where you have to extract the Mid- Surface manually, followed by performing 2D mesh as per the Quality parameters mentioned.
What will you do in this project?
Step 1 - Analyse the CAD Model
Step 2 - Extract the Mid- Surface
Step 3 - Perform the 2D Mesh on the Mid- Surface
Step 4 - Check for the Elemental failure as per Quality parameters
Step 5 - Specify the Thickness to Individual surface
In this project, you will work on a Plastic Component of a Car side door panel. You will do the following in this project,
- Importing the CAD Model followed by Geometry cleanup
- Thickness measurements are made to extract Mid-Surface
- Mid surface can be extracted by using various techniques
- Meshing the Mid surface with the provided Quality Criteria
- Solving the failed elements by using Mesh improvement tools
- Assigning thickness properties to the Meshed model
- Converting them from 2D to 3D representation
Similar Projects you might be interested:
1 month
Mechanical , Production , FEA , Automotive
1 month
Mechanical , Production , FEA , Automotive
1 month
Mechanical Engineering
Project Highlights
The project is an advanced level project
Pre-requisites
Software requirement
Pre Processing the Plastic side door model of a Car
In this project, you will perform the 2D meshing for the Plastic component present in the Car Model. Basically, plastic parts will be provided in the Car in order to reduce the weight without compromising the safety of passengers. In the same way, the Car side door model will be made up of Plastic component. To perform any analysis in the model, the first task is to discretize the part into a finite number of elements which is called Pre-processing or Meshing. HyperMesh is used for pre-processing side door and make the model ready for any Analysis.