Development of Hybrid Drives using MATLAB & Simulink in Hyderabad
RELATED RECENT PLACEMENTS
Rohit Mali
William O'Neil India
NMIMS MUMBAI
Dhiraj Satghare
RD Civil Solution
Acharya Shrimannarayan Polytechnic
Namrata Rao
Piaggio & C. S.p.A.
Rajeev Gandhi College of Engg and Research Institute
Siddhi Parab
C.C Engineers
lokmanya tilak college of engineering
Anil Katarkar
3D engineering
NATIONAL INSTITUTE OF TECHNOLOGY
Bhavesh Kumbhare
Dar Al-Handasah Engineering company
Rashtrasant Tukadoji Maharaj Nagpur University
Akash Bhadkumbe
XS CAD
Dr. D Y Patil College of Engineering & Innovation, Varale
Madhura Joshi
NEILSOFT LIMITED
Government Polytechnic Ratnagiri
Syllabus
This course is full of best-in-class content by leading faculty and industry experts in the form of videos and projects
Course Overview
- The students will gain a thorough knowledge of how hybrid electric drives work in the automotive industry.
- Students will gain exposure to:
- Basics of Hybrid Electric Powertrains
- Existing and Future Architectures
- Powertrain System Design Modelling
- Simulation and Controls related to Powertrains
- The students are exposed to the modern trends and standard practices being followed in the industry right now.
- The main goals of this course are to teach the concepts of hybrid electric vehicles and to assist in the creation of a complete electric vehicle using MATLAB and Simulink.
- This course forms the foundation for anyone willing to take up a career as a Modelling and Simulation Engineer.
Course Syllabus in Hyderabad
On a daily basis we talk to companies in the likes of Tata Elxsi and Mahindra to fine tune our curriculum.
Week 1 - Introduction to Course: Objectives and Scope
The following topics are covered this week.
- Current Transportation Scenario
- Driving Factors
- Automotive Trends
- Technologies
- Hybrid Vehicles
- Course Outline
Week 2 - Vehicle Dynamics: Longitudinal Traction Equations and Road Load Equations
The following topics are covered this week.
- Longitudinal Lumped Dynamics of a Vehicle
- Tractive Forces
- Loads Acting on a Vehicle
- Power Requirement Calculations
Week 3 - System Development and Testing, Drive Cycles
The following topics are covered this week.
- Testing Objective and Parameters
- Drive Cycles
- Energy and Power Requirement for the Cycle
- Different Test Procedures
Week 4 - Energy and Performance: Analysis and Modeling
The following topics are covered this week:
- Fuel Efficiency
- Energy Consumption
- Acceleration Performance
- Drive Quality
- Purpose/Applications and Types of Modeling
- Energy Flow
- Forward and Backward Models
Week 5 - Hybrid Architectures
Hybrid drives are drivetrains that consist of an engine and an electric motor. There are different architectures for hybrid drives, each having its own advantages and disadvantages. This week, the following topic is discussed in detail.
- Hybrid Drive Architecture
Week 6 - IC Engines
The following topics are covered this week.
- Drivetrain Basics
- Engine Basics
- Operation
- Engine Maps
- BSFC
- Efficiency
- Emissions
Week 7 - Transmission
The following topics are covered this week.
- Transmission Types:
- MT, AMT, AT, CVT, DCT, EVT, and DHT
- Torque Converters
- Planetary Gear Sets
- Clutches
- Function
- Losses
Week 8 - Electric Motors & Power Electronics
The following topics are covered this week.
- Principle of Operation
- Different Types:
- DC, AC, PMSM, Induction, and SRM
- Efficiency
- Losses
- Advantages
- Disadvantages
- Electric Drives
- Inverters
- Motor Control and Other Power Electronics
Week 9 - Energy Storage Systems
The following topics are covered this week.
- Flywheels
- Batteries
- Ultracapacitors
- Hydrogen
- Battery definitions:
- C-rate
- Capacity
- SOC
- Specific Energy
- Specific Power
- Modeling
- Controls
- BMS
Week 10 - Energy and Performance Management
The following topics are covered this week.
- Energy Management Strategies
- Charge Sustaining/Depleting
- Ways to Improve Fuel Economy
- Performance
Week 11 - Optimization of Hybrid Drives
In this week, the following topics are covered.
- Optimal Design and Optimal Control of Hybrid Drives
- Optimization of Hybrid Drives for Accurate and Efficient Operation
Week 12 - Current architectures
In this week, the following topics are covered.
- Vehicles that use Hybrid Drivetrains
- The Benefits of using Hybrid Drivetrains
Our courses have been designed by industry experts to help students achieve their dream careers
Industry Projects in Hyderabad
Our projects are designed by experts in the industry to reflect industry standards. By working through our projects, Learners will gain a practical understanding of what they will take on at a larger-scale in the industry. In total, there are 2 Projects that are available in this program.
Development of Forward Energy Based Fuel Consumption Model of a Conventional Vehicle
Development of a Forward Energy Based Fuel Consumption Model of a P1 Hybrid Vehicle
Our courses have been designed by industry experts to help students achieve their dream careers
Ratings & Reviews by Learners
Skill-Lync has received honest feedback from our learners around the globe.
Instructors profiles
Our courses are designed by leading academicians and experienced industry professionals.
1 industry expert
Our instructors are industry experts along with a passion to teach.
7 years in the experience range
Instructors with 7 years extensive industry experience.
Areas of expertise
- Electrical automotive engineering
- Automotive design engineering
- Applied Electronics
Find Development of Hybrid Drives using MATLAB & Simulink in other cities
Pune
Delhi
Mumbai
Bangalore
Chennai
Similar Courses
Got more questions?
Talk to our Team Directly
Please fill in your number & an expert from our team will call you shortly.