Frontal Crash Analysis of a Neon Car Model using Hypermesh and RADIOSS

Frontal Crash Analysis of a Neon Car Model using Hypermesh and RADIOSS

In this project, you will be setting up the case for frontal crash analysis for a reduced neon car model. Here, you will import the model, do initial penetration checks. You will add mass to the model so that the CG point is at the desired location and create proper contacts for the model. After that, create a rigid wall for the model and assign proper boundary conditions for the model. To acquire certain results, cross-sections are created on some of the BiW components, accelerometer sensors are mounted in the base of the B-pillar, and to calculate intrusions - the springs are created between the requested nodes. To obtain all the results output blocks are created for the said conditions and the engine cards are manipulated to our requirements. The output is visualized using Hyperview and plotted using Hyperview.

• Performing Explicit analysis of frontal crash of a Neon car
• Modelling Contacts, Create Rigid Wall, Assign Boundary Conditions in RADIOSS
• Post processing the model using Hyperview and Hypergraph