Soumya
Soumya Mariguddi

Structural Enginner

About

I am a Structural Design Engineer, working in Bangalore.

Experience

Project Officer

IC&SR Building IIT Madras

01 Sep 2020 - 30 Jan 2021

Design Engineer

Manohar Consultants

03 Feb 2020 - Still Now

Trainee Engineer- Structures

DesignTree Service Consultants Private Limited

15 May 2019 - 31 Aug 2019

Intern-Structural Engineer

DesignTree Service Consultants Private Limited

02 Jul 2018 - 31 Mar 2019

Domains

Software Skills

Autodesk AutoCAD

Autodesk AutoCADNot verified by Skill-Lync

ETABS

ETABSNot verified by Skill-Lync

Autodesk Revit

Autodesk RevitNot verified by Skill-Lync

SAFE

SAFENot verified by Skill-Lync

STAAD.Pro

STAAD.ProNot verified by Skill-Lync

Area of Expertise

College Information

M.Tech

Vellore Institute of Technology

10 Jul 2017 - 01 Apr 2019

B.E

Dayananda Sagar College of Engineering

01 Sep 2012 - 01 Apr 2016

School Information

12th

Christ college Ground

01 Jun 2011 - 01 Apr 2012

10th

Christ School

01 Jun 2009 - 01 Apr 2010

Projects

Week 6 Challenge

  Here the wardrobe cabinets are drawn with the help of various autocad tools: Step1: The plan of the wardrobe is drawn with the help of horizontal and vertical construction lines. The doors of these cabinets are drawn with the help of arc and line command as shown in the figure. Step2: The front elevation of the…

Week 7 Challenge

Aim of the project: To draw the given plan along with the given sections with appropriate dimensions. The drawing in the project is done with help of AUTOCAD software.  Procedure: Step 1: The units of the drawing sheet is set to Engineering precision. Step 2: Construction line in horizontal and vertical direction…

AutoCAD_Developing Architectural and Structural drawing_Project 1

Aim: The aim of the project is do design a Residential Space in a 60'x20' plot size. The idea of this project was obtained from an under-construction house I visited. It consists of Ground floor, First Floor and a terrace level. It is a Duplex house with good lighting and ventilation. Procedure: Step 1: First the size…

AutoCAD_Reinforcement Bar Shapes, Types of Doors, Creating symbols legend and Creating standard template_Week 8

Aim of the project: To draw the given reinforcement bar shape, door shapes and sized as provided. The drawing in the project is done with help of AUTOCAD software.  Procedure: Step 1: The units of the drawing sheet is set to Engineering precision. Step 2: Construction line in horizontal and vertical direction…

AutoCAD_Layout of Kitchen Cabinet, Elevation of a Residential Building and Industrial Building section_Week 9

Aim of the project: To draw the given ELEVATION, PLAN AND SECTION as provided. The drawing in the project is done with help of AUTOCAD software.  Procedure: Step 1: The units of the drawing sheet is set to Engineering precision. Step 2: Construction line in horizontal and vertical direction are drawn using the…

AutoCAD_Creation of Layout_Week 10

Aim of the project: To create layout of the drawings created a few weeks in the challenges. Procedure: Step 1: The layout as per mentioned is selected i.e., Tutorial.mArch.dwt from the templates existing Step 2: The view ports are created as per the sizes mentioned and the drawing is adjusted in the view port to view the…

Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad

Aim of the project: To draw the given 3D figures. The drawing in the project is done with help of AUTOCAD software.  Procedure: Step 1: The units of the drawing sheet is set to Engineering precision. Step 2: For the first question the dimensions lines are drawn using sperical co-ordinate system.  Step 3:…

Creating 3D Isometric view of various structural elements in AutoCAD

Aim of the project: To draw the given 3D figures. The drawing in the project is done with help of AUTOCAD software.  Procedure: Step 1: The units of the drawing sheet is set to Engineering precision. Step 2: For the first question the dimensions lines are drawn using sperical co-ordinate system.  Step 3:…

Creating a 3D rendered model for a Residential Building in AutoCad

Aim: To create a 3D model of a resedential building with rendered view Procedure: Step 1: The building considered for creating a 3D model and rendered view is taken from the Project 1 Step 2: The layers are created before creating a 3D model as shown below. Step 3 : After the required layers are created, the boundary for…

Introduction to REVIT concepts

Aim: To create the required options of REVIT model as mentioned Procedure: The following are created as mentioned  Q1 From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately Q2 Save the new project file. Close and open using icons…

Project on Concrete Mix Design for various grades of Concrete

Aim: To determine the mix design for M35 concrete with fly ash consisting of the following properties: Grade designation : M35 Type of cement : OPC 43 grade confirming IS 12269 Type of mineral admixture : Fly ash Maximum nominal size of aggregate : 20 Minimum water-cement ratio : 0.45 (Table 5 of IS 456:2000) Workability…

Creating Levels, Grids, Layout and model elements for a residential unit using REVIT

1) What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. BIM is the abbrevation of Building Information Modelling. It is a process for creating and managing information on a construction project as the project progresses. They are used to create all the information in the project such…

Creating Walls, Partition walls and Floors for a residential layout using REVIT

1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created from…

3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level Aim: To model a Ceiling from the architecture tab above the walls at the first-floor level Procedure: Step 1: From the architectural tab, ceiling tab is used…

Introduction to National Building Code and Steps in a Construction project

1)Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ? Building code is a set of rules that are developed an maintained b a standard organization. This standard organization operates independently of the jurisdiction or area in which the building code standards are being developed.…

Usage of Collaborate tool in REVIT

1) Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project Aim: To set base point and co-ordinate point for shared project Procedure: Step 1: Using the Architectual tab, Grids are drawn and are named accordingly as shown below. Step 2: From the manage tab,…

Creating Architectural and Structural model with 3D rendering using REVIT

Aim: To create a multi-storey residential unit with architectural and structural details Pracedure: Step 1: The grids are drawn and the levels of the defined as shwon below. Step 2: The ground floor and first floor plans are drawn as shown below by adding walls, doors and windows.  Step 3: Two section are created…

Structural analysis of a buidling using Robot Structural Analysis

1) What are HVAC systems? Why are they essential in the modeling of buildings HVAC system is one of the important component in building modelling. HVAC stands for Heating, Ventilation ans Air Conditioning. Heating means to increase the temperature of the input air which flows into the building. Ventilation is replacement…

Preparing Schedule & Cost Estimation for a building using REVIT

1) Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below           a. Using 3D model create a section box - BX           b. To create similar doors and windows in a floor plan layout - CS     …

Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo

1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. Aim: To create a set of sinusoidal points and curve using Dynamo. Procedure: Step 1: In the new Revit file, Open Dynamo file. Step 2: In the Dynamo file, points are created using point by co-ordinate command and…

Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class Aim: To import Revit work created in week 6 to Naviswork Procedure: Step 1: The Revit file is converted to NWC file…

Identification of Cracks

1) a) This type of failure is called shear failure. Due to high local tensile stresses in the web the “inclined flexural shear cracks” propagate, and reduces the capacity of the different possible shear transfer mechanisms.When the shear transfer capacity between two neighboring portions of the beam…

Calculation of Stiffness in Structural elements

Compute lateral stiffness of the one story frame with an intermediate realistic stiffness of the beam. The system has 3 DOFs as shown. Assume L = 2h and Elb = Elc   Solution: The stiffness matrix of the above problem can be written as To obtain the stiffness matrix, consider unit force at u1 = 1 and u2=u3=0,…

Concept on positioning of Columns

Question 1: Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility. Solution: The plan of the building looks symmetrical in both X and…

Sketch a G+1 residential plan according to Vaastu Shastra and Calculation of Loads as per IS code

List of drawings to be provided to site are: Center line drawings: It is used for marking the columns at the site during first stage where soil is excavated for the placement of the footings. It contains all the grid positions and column dimensions and numbering (provided outside of column). Distance between grids and…

Conceptual design of a building with columns and shear walls

Question 1:The building shown, 20 × 35 m in plan, has columns on a 5 × 5 m grid and shear walls (with dimensions shown in m, 250 mm in thickness) in three alternative arrangements, (a), (b), (c), all with the same total cross-sectional area of the shear walls. Compare the three alternatives, taking into account…

Modelling of 25 storey building with the specified properties using ETABS

Aim: To model 25 storey model in ETABS Procedure: Step 1: Open the ETABS model and set the grids as shown in the figure below. Step 2: The stories with floor to floor height are added as shown below. Step 3: The material required for the modelling is defined as shown below. Step 4: The sections of columns, beams and slabs…

Projefct 1_Comparative study of different storey buildings for Seismic forces

Aim: To understand the behaviour of the building when the factors are changed gradually. Procedure: Step 1: 10 different building models as mentioned below are modelled in ETABS for the comparitive study.   Step 2: All the models are pinned joined at the base as mentioned above. 1) A- Building 2) B-Building 3) C-Building…

Reinforcement Detailing of Beams from ETABS output

Aim: To provide reinforcement Details of the beams mentioned. Procedure: Step 1: The provided ETABS models is analysed and designed as per IS 456:2000 in ETABS as shown below. Step 2: Once the analysis is complete the detailing of the beams in grid A and grid 3 is drawn as shown below according to the steel provided. Step…

Reinforcement detailing of Columns from ETABS output

Aim: To provide reinforcement details of the provided columns Procedure: Step 1: Once the column design is done in the ETABS, the required reinforcement is obtained and the steel of the same is provided as shown below. Step 2: As per IS 13920:2016, the confining reinforcement is provided as shown below.

Analysis & Design of RCC shear walls in the model using ETABS

Aim: Detailing of shear wall Procedure: Step 1: The provided ETABS model is analysed and the shear wall design is run as shown in the figure below. Step 2: The mentioned shear wall is labelled as P1. The design results of pier P1 is extracted as shown below. From the obtained results, it can be seen that a boundary zone…

Structural Modelling using Etabs 2018

Aim: To Model the provided building in ETABS, which complies with the provisions of IS 1893 and IS 13920 Procedure: Step1: The provided building is modelled in the following process. Step 2: Once the modelling of the building is done according to the architectural drawing the loading to as per IS 875 Part1 and Part-2 is…

Design of Shallow Foundation (Isolated Footings)

Aim: To design an isolated square footing for the above given details. Procedure:  The design procedure is as follows: Service load = 2000/1.5 = 1333.33 kN Approximately considering service load as 1350 kN Size of footing: Assuming the weight of the footing + backfill to be 10% of the load, Base Area required = (1350x1.1)/150…

Project 2_Design & Analysis of a Hostel building at Guwahati, Assam

Aim: To produce the etabs models of the provided drawings, analyse and design the components as mentioned. Procedure: Step 1: ETABS model of Block A is created as follows. The materials required are designed and grids are created to create the model as shown below. Step 2: The loading are applied to the building as follows.…

Week 1 Challenge

Summarize the user interface in TSD with the for the following items: -   Project Workspace –    The project workspace is the central control area of our drawing. It is a clear whitespace used for drawing our structure. We can add different levels, sub models, and sub structures. We can acess…

Week 2 Challenge

Aim: To create column pedestals, steel columns and primary and secondary beams in the model. Procedure: Step1: The pedestal property to be included is created in the Manage property sets as shown below and then modelled it in modeling tab. Step 2: The steel column to be modelled is in the manage property option and the…

Course Certificates

Civil Engineering Fundamentals Module

Merit Certificate UID : 4cot5ray0lbkud1i

Drafting and Design Using Revit

Merit Certificate UID : raqlnv3b2c7szi09

AutoCAD Essentials for Civil Engineers

Merit Certificate UID : 7s34wih61zgl2vo5

AutoCAD Essentials for Civil Engineers

Completion Certificate UID : wnuctreg15l8yodz

Drafting and Design Using Revit

Completion Certificate UID : yt52r1vdweuzsmip

Civil Engineering Fundamentals Module

Completion Certificate UID : iaen3w2sobcxgurh

Participation Certificates

Design of Tensile Membrane Structure

Workshop Certificate UID : 93fieuca8n