Skill-Lync's Spring Scholarships D H M S For more exciting offers - Click here

Mechanical Engineering Essentials Program

Essential Program for Mechanical Engineers

  • 0% EMI Option Available
  • Domain : CFD
  • Pre-requisites : For Mechanical, Aerospace & Automotive Engineers
Enroll Now View demo

Introduction

About The Program

Many automotive companies and consultants look for candidates with specific CAE skills.However, most colleges do not even come close to explaining and teaching these essential tools to students.Skill Lync wants to solve this problem by offering the Essentials Program for Mechanical Engineer. In a single program, you can learn Finite Element Analysis, Computational Fluid Dynamics, Multi-Body Dynamics, Computer aided Design and Numerical Programming.

GET COURSE COUNSELLING TODAY

Get a 1-on-1 demo to understand what is included in the course and how it can benefit you from an experienced sales consultant. The demo session will help you enroll in this course with a clear vision and confidence.

Request a Demo Session

Structural Analysis SYLLABUS

1Introduction to FEA Analysis

You will be introduced to the concept of FEA, and the fundamentals of the stress-strain graph. You will be taught the various types of FEA analysis, and the different processes in performing an analysis. You will also learn about linear and non-linear simulations. 


  • You will be introduced to different types of FEA analysis
  • You will understand the types and effects FEA analysis will have on the same model


2FEA Analysis on a Uniformly Loaded Cantilever Beam

In this module, you will learn how to perform a 1D/2D/3D analysis on a cantilever beam. You will design the model and understand how to do the static analysis. You will be taught how to perform a design study. Finally, you will learn how to compare the results in the SOLIDWORKS. 


  • You will learn how to perform analysis on a cantilever beam
  • You will learn the different conditions and settings to replicate the model within the software 
  • You will perform 1D,2D, and 3D analyses on the same model and you will compare the results
  • You will then run the simulation through a post-processor to return the results

3Buckling Analysis of a Cyclonic Separator Stand

You will be trained in how to import a neutral file and clean up the geometry for the structural analysis following which you will be introduced to the concept of buckling analysis. 


  • You will be Introduced to buckling analysis in SOLIDWORKS
  • You will understand how to increase the factor of safety of the model

4Fatigue Analysis on an S-hook

In this module, you will learn about the fatigue analysis and the effect of the S-N curve. You will learn the types of loading available for the fatigue analysis. You will learn how to import the results of the static analysis to the fatigue analysis and how to create an animation from the results. 


  • You will be introduced to fatigue analysis in SOLIDWORKS
  • You will understand the speed and torque variation

5Drop Test

In this module, you will learn about the requirements for doing a drop test in a PCB board and plot the results. 


  • You will learn how to perform a drop test on a model
  • You will understand the various factors that affect the drop test
  • You will post-process the simulation and identify the results


6Frequency Analysis

In this module, you will learn the concepts of the vibration and the modes of vibration. You will learn about the types of solvers available in SOLIDWORKS for the frequency analysis and how to perform the frequency analysis in SOLIDWORKS.


  • You will have a brief introduction to frequency analysis in SOLIDWORKS
  • You will figure out the different mode shapes of a rectangular beam using frequency analysis
  • You will learn how to perform frequency analysis using a PCB 


Projects Overview


Multi-Body Dynamics Simulation SYLLABUS

1Design and MBD Simulation on Geneva Mechanism

You will be introduced to motion study in SOLIDWORKS. You will learn the concepts of the Geneva mechanism and their types. You will also learn how to model and assemble the external Geneva mechanism, and how to perform a motion study on it. You will learn how to plot the contact force between the parts. 

 

 

In this module, you will study the following, 

 
  • Understanding the basics of modelling and assembling in SOLIDWORKS
  • Pre-processing the model for the motion analysis and running a simulation
  • Post-processing the simulation to get the results as plots
 

2Design and MBD Simulation on a Machine Vice

You will be introduced to the machine vice and will learn to model and assemble the machine vice. You will learn about screw mates and how to perform motion studies on it. 

 

These are the things you will learn in this module, 

 
  • Introduction to the screw mate
  • Tracing the displacement of the movable jaw

3Design and MBD Simulation on Planetary Gear Train

You will learn the concepts of the planetary gear train and gear terminology. You will learn how to import the standards gears in SOLIDWORKS to do the motion study. 

These are the topics that be covered in this module, 

  • Learning the basic gear terminology to model a gear
  • Understanding the speed and torque variation
  • Learning about the application of gear mate

4Design and MBD simulation on IC engine Piston Assembly

You will learn about the concepts of the IC engine piston kinematics and you will learn how to design and do the motion study. 

 

 

You will study the following in this module, 

 
  • Understanding the effect of wrist pin offset in the piston displacement.
  • Assigning the material to the parts

5Design and MBD simulation on IC Engine Valve Train

You will learn to model the IC engine valve train. You will learn the effect of spring in the valve train. You will learn how to calculate the cam lift and will design the cam based on it. 

 

These are the topics you will study in this module, 

 
  • Understanding the application of the CAM
  • Performing a calculation to model the CAM as per the valve lift specifications.
  • Studying about the damping coefficient and the free length of spring


Projects Overview


Flow Simulation SYLLABUS

1Introduction to CFD and SOLIDWORKS Flow Simulation:

Introduction to the concepts of Computational Fluid Dynamics (CFD).

2Steady-state Simulation of a Pipe Flow

You will learn to model simple geometry using SOLIDWORKS. You will also learn how to set up a fluid study in SOLIDWORKS, and understand necessary boundary conditions, along with the initial conditions to run the simulation. In this module, you will learn how to change the mesh settings as well. 


You will be trained in the following. 

  • Simulating flow through a pipe is a classical CFD problem. It offers insight into the various inputs that go into running a CFD simulation.
  • Introduction to parametric studies and grid dependency test.
  • Understand the concepts of global maxima and global minima. 

3Transient Flow Simulation of Flow over a Cylinder

You will be introduced to the concepts of external simulation and transient analysis. You will be learning how to calculate the total flow time and output time step.

4Flow Over an Airfoil

You will learn about how to import the NACA airfoil data into SOLIDWORKS to create airfoil geometry. 

You will also learn how to, 
  • Simulate the flow over a 2D NACA airfoil
  • Calculate the drag and lift forces for the various angles of attacks.

5Flow over an IC Engine Valve

You will be learning the effect of the valve lifts over the mass flow rate. You will learn how to create flow trajectories. 

And perform the following calculations, 
  • Perform transient analysis at different valve lifts
  • Create a plot of lift vs mass flow rate

6 Flow-through a Simple Centrifugal Pump

In this module, you will be introduced to the concept of moving reference frame while also learning about the rotating body feature in SOLIDWORKS.

You will perform the following projects within this module, 

  • Using the MRF approach to simulate flow through a Centrifugal pump
  • Plotting a pump performance curve


Projects Overview


Computer Programming Using MATLAB SYLLABUS

1Introduction to MATLAB

You will be introduced to MATLAB and you will be taught the basics of MATLAB by using a top-down approach. That is, you will start directly by solving problems and stop in the required places to learn about the fundamentals of programming.

  • You will learn the MATLAB syntax and the various commands used in it.
  • You will understand the methods and the ways to use the commands in different scenarios.
  • You will learn to manipulate your own calculations and comparisons
  • You will learn about the use of arrays.
  • You will learn about the Functions used along with plotting, creating movies, creating figures etc

2Forward Kinematics Simulator

In this module, you will write programs to simulate a 2R Robotic Arm Manipulator
  • You will animate the manipulator motion using ImageMagick.
  • Here you will learn about the simulation part
  • And you will learn how to create a movie clip along with the spatial motions of Robotic arm
  • You will learn how the FOR loop plays a role in the programming
  • And how the “hold on” command works
  • And about the arrays and linspace commands

3Air Standard Cycle Simulator

In this module, you will write code to simulate an Air Standard Cycle.


  • Your code will solve the piston kinematics equation to calculate the volume trace.
  • Your code will create PV diagrams for different operating conditions.
  • You will learn how to work on various thermodynamic relationships
  • You will learn about the pressure-volume variations.
  • And you will learn how the order of the program is significant
  • Functions can be cleared through this challenge
  • You will also learn about the plots, legends used in the graphs
  • Finally, you will learn about the piston kinematics

4Vibrations and Dynamics

Most mechanical engineering devices are dynamic in nature. Understanding the effect of forces on the product motion is of utmost importance. The equation of motions for these systems forms a set of Ordinary Differential Equations.
  • Implement BDF and FDF methods to solve ODEs
  • Learn about the real use of differential equations
  • How the differential equations connect to the real-world applications and how to solve those differential equations
  • You will learn about the ODE solvers, and also about the syntax of ODE’s, and also about various supplementary commands

5Curve fitting and regression

  • An engineer needs to understand the dependence between system input and output. Curve-fits are a great tool to do this. In this module, you will learn how to perform curve fits with MATLAB.
  • Curve fits and regression are the part of Machine learning and Neural Networks
  • Curve fitting helps you to make a comparison study with the original ideal data set with the experimental one 
  • And you will learn about the polynomials and their best fits
  • You will learn about the PolyFit and PolyVal commands
  • You will know how to calculate the errors
  • You will learn about SSR, SSE, SST

6Genetic Algorithm

  • Genetic Algorithm is a procedure to optimize multi-parameter systems. It is used to optimize different types of systems and processes.
  • You will learn about the optimization techniques used in industries
  • Genetic Algorithm is one of the optimization techniques used widely and you will learn how GA works
  • You can easily optimize their values using the Genetic Algorithm
  • You will know about the GA syntax and how to get the global maxima 
  • You will also learn about the options, they can include apart from the default one and also about the stalagmite functions and how it works.
  • And also about the population size, number of generations, fitness value, and termination of further generations


Projects Overview


Computer Programming Using PYTHON SYLLABUS

1Introduction to Python

This module provides an introduction to Python using different mathematical operations and performing operations such as, 
  • Array manipulations
  • Plotting and understanding the relationship between 2 variables
  • Looping using one or more looping conditions

2Plotting and Visualization

In this module, you will write programs that plot the p-v line of an air standard cycle and also create animations for a robotic arm with 2 degrees of freedom and simulating the motion of a pendulum. 

In this module, you will learn the following, 
  • Understanding the relationship between 2 variables using plots
  • Saving plots and creating animations using ImageMagick
  • Using tables 

3Solving Dynamic Equations

In this module, you will learn to solve ordinary differential equations using the scipy module. This is of particular interest since differential equations govern the equations of motion for various mechanical systems and this method can be used to numerically solve initial value problems. 

  • Using odeint to solve initial value differential equations
  • Create a pendulum using the available coordinates
  • Plotting and saving images
  • Creating an animation using ImageMagick

4Curve Fitting and Regression

In this module, you will learn how to perform curve fitting using Python. Curve fitting finds widespread use in predicting the relationship between different variables for which an existing relationship doesn’t exist. Furthermore, curve fitting can also be used as a predictive tool in machine learning and AI to predict what will happen in the future using the trend of the plot. 

  • Curve fitting using the scipy module
  • Learning how to check how well the data has been fit

5Understanding Iterative Solvers

This module also covers iterative solvers, which find widespread use in the solution of polynomial equations and other aspects like understanding how to obtain the solution in the most optimized manner possible.
    
  • Using an iterative solver
  • Understanding how to use while loops

6Data Analysis

The final module of the coursework deals with data manipulation which is used in many industries like CAE and CFD to post-process the results from the simulation. This is particularly useful if the same simulation is run multiple times for different configurations and this code can be used to obtain the data automatically. 

At the end of this module, you will be able to, 
  • Taking data from a file and manipulate the data to create meaningful plots
  • Make necessary calculations
  • Automate the post-processing procedure


Projects Overview


Flexible Course Fees

Choose the plan that’s right for you

Basic

5 Months Access

$188.86

Per month for 3 months

  • Access Duration : 5 Months
  • Mode of Delivery : Online
  • Project Portfolio : Available
  • Certification : Available
  • Email Support : Available
  • Forum Support : Available
Premium

Lifetime Access

$296.78

Per month for 3 months

  • Access Duration : Lifetime
  • Mode of Delivery : Online
  • Project Portfolio : Available
  • Certification : Available
  • Individual Video Support : 12/Month
  • Group Video Support : 12/Month
  • Email Support : Available
  • Forum Support : Available
  • Telephone Support : Available
  • Add-ons Industry Projects : 4
  • Offline Skill-Center Access : Available
  • Dedicated Support Engineer : Available

You Might Also Be Interested In

Related Courses

See all

Testimonials

Companies hire from us

See all

Certification

  • Top 5% of the class will get a merit certificate
  • Course completion certificates will be provided to all students
  • Build a professional portfolio
  • Automatically link your technical projects
  • E-verified profile that can be shared on LinkedIn

SKILL LYNC WORKS TO GET YOU A JOB

See all

The Skill-Lync Advantage

See all