Analysis and Design of Industrial Structures using STAAD.Pro in Pune
RELATED RECENT PLACEMENTS
Parthiban M
Riverstone
SRM TRP Engineering College
Kotesh Mogudala
Tata Autocomp Systems
Anurag University, Hyderabad
Vipin Jiwane
Orena Solutions
Walchand College of Engineering, Sangli
Chandrakumar ADEPU
Selec Control
Ganapathy Engineering College
Jiji M
Adrasti
Sreepathy Institute of Management And Technology (SIMAT)
Durga Prasad Sunnam
Adrasti
Ucet Technical school in Dokiparru, Andhra Pradesh
Pratik Mankar
Adrasti
B R Harne College Of Engineering
MAHATHIR MOHAMED
TATsunoInida Pvt ltd
K.S.K College of Engineering and Technology
Syllabus
This course is full of best-in-class content by leading faculty and industry experts in the form of videos and projects
Course Overview
- This program is for engineers/students who would like to have their career (or switch) in the field of structural engineering with a specialisation in steel structures.
- This course covers the fundamentals in steel for practical design and also introduces the software STAAD.Pro to design an industrial structure.
- The first half of the course deals with the elements in steel structure and their design based on IS code and teaches students how to combine them into a project resulting in designing a fully integrated steel structure.
- The second half concentrates on the software package STAAD.Pro that is used in industries widely.
Course Syllabus in Pune
On a daily basis we talk to companies in the likes of Tata Elxsi and Mahindra to fine tune our curriculum.
Week 01 - Introduction to Industrial Structures
- In this session, you will learn
- Steel structures in the industry
- The stress-strain behaviour of structural steel
- The properties of steel & shapes
- Types of industrial structures
- The key design factors
- Types of structural systems in steel building
- The general loads on industrial structures
- Basic structural steel elements
- Gravity and lateral load path
- Structural redundancy
- General design procedure
- Iterative design process
Week 02 - Design of Tension Member
- In this session, you will learn
- The types of tension members
- The behaviour of tension member
- Failure mode possibilities
- The design strength of tension members
- Factors affecting member strength
- Shear Lag
- Sections used for the tension member
- Design of tension member
Week 03 - Design of Compression Member
- In this session, you will learn
- The types of compression member
- The behaviour of compression member
- Failure mode possibilities
- Sections used for compression member
- The effective length of compression member
- Design of compression member
- Design of Built-up compression member
Week 04 - Design of Beams
- In this session, you will learn about
- Types of beam
- The loads on Beam
- Section classification
- Lateral stability of beams
- The effective length of beams
- The design of laterally restrained beams
- The design of laterally supported and unsupported beams
- Design of purlins (Hot rolled)
Week 05 - Design of Plate Girder
- In this session, you will learn
- The types of sections
- Elements of plate girder
- General considerations
- The proportioning of section
- Preliminary sizing
- Design of plate girder using IS 800:2007
Week 06 - Structural System of Industrial Structure
- In this session, you will learn about the
- Lateral load resisting system
- Vertical load resisting system
- Flooring system (Plating grating & Deck Beam)
- Grating & chequered plate
- Composite floor deck
Week 07 - Modelling of Structure in STAAD.Pro
- In this session, you will learn
- Introduction to STAAD.Pro
- Modelling nodes and beam element
- Generating model geometry
- Viewing geometry
- Creating groups
- Assigning properties
- Assigning specification
- Modelling tapered members
- Assigning custom sections using user table
- Member material specification
- Modelling Finite elements
- Modelling in physical modeller
Week 08 - Loading, Analysis and Design Procedure in STAAD.Pro
- In this session, you will learn
- To create load cases
- To apply self-weight
- Modelling member loads and Floor loads
- Application of load (vertical/lateral)
- Modelling reference loads
- Modelling of moving loads
- Seismic load generation
- Wind load generation
- Application of design parameters
- Performing simple analysis
- Post-processing result interpretation
Week 09 - Analysis & design of Typical Steel Frame structure using STAAD. Pro
- In this session, you will learn
- Input preparation
- General modelling
- Load & load calculations
- Analysis of structure
- The application of design parameters
- Design of structure
- The interpretation of post-processing results
Week 10 - Modelling , Analysis & Design of Industrial building (PEB) in STAAD.Pro.
- In this session, you will learn about
- Introduction to Pre-engineered building
- the comparison of PEB over conventional building
- Various components of PEB
- General loads on PEB
- Load combination as per IS 800: 2007 & AISC ASD
- Input preparation
- Load & Load calculations
- Analysis of structure
- The application of design parameters
- Design of structure
Week 11 - Analysis & design of Pipe Rack structures using STAAD.Pro
- In this session, you will learn
- Introduction to pipe racks
- The components of pipe racks
- The types of pipe racks
- Loads on pipe racks
- Load combination as per AISC, LRFD, ASD
- Design criteria of structure
- Case Study of pipe rack structure
Week 12 - Design of Foundation using STAAD.Foundation
- In this session, you will learn
- Introduction to STAAD.Foundation
- Modelling supports
- Modelling support loading
- Importing information from STAAD.Pro
- To design isolated footing
- To design eccentric isolated footing
- To design continuous footing
- To design pile cap
- To design soil supported mat foundation
- To design pile-supported mat foundation
Our courses have been designed by industry experts to help students achieve their dream careers
Industry Projects in Pune
Our projects are designed by experts in the industry to reflect industry standards. By working through our projects, Learners will gain a practical understanding of what they will take on at a larger-scale in the industry. In total, there are 2 Projects that are available in this program.
Proposed Coil Center (Industrial Building) with Crane Load at Chennai using STAAD. Pro
Proposed PEB warehouse (Industrial Building) at Coimbatore using STAAD. Pro
Our courses have been designed by industry experts to help students achieve their dream careers
Ratings & Reviews by Learners
Skill-Lync has received honest feedback from our learners around the globe.
Flexible Pricing
Talk to our career counsellors to get flexible payment options.
INR 40,000
Inclusive of all charges
Become job ready with our comprehensive industry focused curriculum for freshers & early career professionals
1 Year Accessto Skill-Lync’s Learning Management System (LMS)
Personalized Pageto showcase Projects & Certifications
Live Individual & Group Sessionsto resolve queries, Discuss Progress and Study Plans.
Personalized & Hands-OnSupport over Mail, Telephone for Query Resolution & Overall Learner Progress.
Job-Oriented Industry Relevant Curriculumavailable at your fingertips curated by Global Industry Experts along with Live Sessions.
Instructors profiles
Our courses are designed by leading academicians and experienced industry professionals.
1 industry expert
Our instructors are industry experts along with a passion to teach.
5 years in the experience range
Instructors with 5 years extensive industry experience.
Areas of expertise
- Structural design of bridges/ flyovers/ ROBs/ Metro Viaducts
Find Analysis and Design of Industrial Structures using STAAD.Pro in other cities
Hyderabad
Delhi
Bangalore
Mumbai
Chennai
Similar Courses
Got more questions?
Talk to our Team Directly
Please fill in your number & an expert from our team will call you shortly.